RDL D-RN02 Wall-Mounted Mic/Line Dante Interface 0x2 (White)

The RDL D-RN02 is a wall-mounted mic/line Dante interface that supports two XLR audio outputs.

The RDL D-RN02 is a wall-mounted mic/line Dante interface that supports two XLR audio outputs. It offers single-gang Dante or AES67 software selectable mic or line output. The device uses R for its operation. This interface is designed for professional use and includes specifications such as network connector, transmission rate, sample rates, bit depth, and operating conditions. It also features balanced output level, power over Ethernet, and dimensions of 6.7 x 6.25 x 2.75 inches with a weight of 0.43 lb.

• Specifications: TYPICAL PERFORMANCE Network Connector:RJ45 with Link and Speed indicators Digital Audio Ethernet Protocol:Dante Transmission Rate:100 Mbps Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz Bit Depth Supported:24 bits Audio Operating Level:-18 dBFS = +4 dBu Reference Level:0 dBFS = +22 dBu
• Network I/O: Network to Mic/Line Outputs Section Outputs (2): Balanced, XLR and Detachable Wiring Block (2) Output Level (Operating): +4 dBu (Nominal) Balanced Output Level (Maximum):+22 dBu Balanced Output Attenuator: Software-controlled, 0 to -63 dB and OFF (Analog Output Per Received Network Channel) Output Impedance: 150 Ohms Balanced Frequency Response: Mic: 20 Hz to 20 kHz (± 0.5 dB) Line: 20 Hz to 20 kHz (± 0.5 dB) THD+N:
• Audio I/O: 2x XLR 3-Pin Dante Input/Output (AES67 Compatible)
• Power Source: PoE
• Operating Conditions: 32 to 122°F / 0 to 50°C