Interlogix D7120-R3-C 10/100 Ethernet Transceiver, MM Laser, 2 Fibers (1310 nm), Rack Mount, Conformal Coat
The Interlogix D7120-R3-C Ethernet transceiver is designed to transmit and receive 10 or 100 Mbps data over multimode optical fiber. The Interlogix D7120-R3-C will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any adjustments. The Interlogix D7120-R3-C is environmentally hardened to operate in extreme temperatures. Status indicating LED's for power and data type are present at the RJ-45 connector and at the fiber optic transceiver end. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Rack mount form factor. Conformal coat.
- 10/100 Mbps Ethernet: auto-negotiating, 10/100 selectable, full-or half-duplex data
- Auto network detection MDI/MDI-X
- Distances up to 1.2 miles (2 km)
- NTCIP compatible
- Tested and certified by an independent testing laboratory for full compliance with the environmental requirements of NEMA TS-1/TS-2 and the Caltrans specification for traffic signal control equipment.
- ST optical connectors standard
- No in-field electrical or optical adjustments required
- Power, transmit and receive data status LED indicators
- Hot-swappable rack module
- IEEE 802.3 compliant
- Comprehensive lifetime warranty
Downloads
Interlogix D7120-R3-C 10/100 Ethernet Transceiver, MM Laser, 2 Fibers (1310 nm), Rack Mount, Conformal Coat
The Interlogix D7120-R3-C Ethernet transceiver is designed to transmit and receive 10 or 100 Mbps data over multimode optical fiber. The Interlogix D7120-R3-C will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any adjustments. The Interlogix D7120-R3-C is environmentally hardened to operate in extreme temperatures. Status indicating LED's for power and data type are present at the RJ-45 connector and at the fiber optic transceiver end. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Rack mount form factor. Conformal coat.
- 10/100 Mbps Ethernet: auto-negotiating, 10/100 selectable, full-or half-duplex data
- Auto network detection MDI/MDI-X
- Distances up to 1.2 miles (2 km)
- NTCIP compatible
- Tested and certified by an independent testing laboratory for full compliance with the environmental requirements of NEMA TS-1/TS-2 and the Caltrans specification for traffic signal control equipment.
- ST optical connectors standard
- No in-field electrical or optical adjustments required
- Power, transmit and receive data status LED indicators
- Hot-swappable rack module
- IEEE 802.3 compliant
- Comprehensive lifetime warranty
Downloads
There are no reviews for this product.
No questions about this product.
