The GE-DSH-82-POE is a 10/100+2 GigE TP/SFP 8-Port Full PoE Industrial Managed Switch from Interlogix that can provide and deliver high operating functions when installed into locations that may consists of climatically demanding or electrically harsh environments. The GE-DSH-82-POE industrial managed switch comes with 1 RJ-45 console interface, Weighted Round Robin and strict priority policy support, 4000VDC Ethernet ESD protection, ingress bandwidth control, as well as web-based consol telnet command line management. The GE-DSH-82-POE managed switch also features a store and forward switch architecture, an 8K entry address table, a relay alarm for power failure, plus dual power operation, and a redundant backup feature. This powerful industrial managed switch is designed as a user friendly unit, and can provide high powered operation with a fast recovery time of 20ms.
Features
- 8-Port 10/100Base-TX RJ-45
- 2-Port Gigabit TP/SFP combo interface, SFP (Mini-GBIC) supports 100/1000 Dual Mode
- 1 RJ-45 console interface for switch basic management and setup
- Relay alarm for port breakdown, power failure
- Supports 4000 VDC Ethernet ESD protection
- FCC Class A, CE compatibility
- Free-fall, shock and vibration stability
- Provides redundant backup feature and recovery time less than 20ms
- Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z gigabit Ethernet standards
- Supports auto-negotiation and half-duplex/full-duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause-frame flow control (full-duplex) groups, out of 4K VLAN IDs
- Supports spanning tree protocol
- Supports strict priority and Weighted Round Robin (WRR) policies
- Ingress/egress bandwidth control on each port
- IGMP query mode for multicast media application
- Dual power operation; External power supply and DIN rail powered
- IP address security management to prevent unauthorized intruder
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
- Web-based, telnet, console command line management
- Supports LLDP to allow switch to advise its identification and capability on the LAN
Downloads
GE-DSH-82-POE-Specsheet
GE-DSH-82-POE-Installation-Instructions
GE-DSH-82-POE-User-Manual
The GE-DSH-82-POE is a 10/100+2 GigE TP/SFP 8-Port Full PoE Industrial Managed Switch from Interlogix that can provide and deliver high operating functions when installed into locations that may consists of climatically demanding or electrically harsh environments. The GE-DSH-82-POE industrial managed switch comes with 1 RJ-45 console interface, Weighted Round Robin and strict priority policy support, 4000VDC Ethernet ESD protection, ingress bandwidth control, as well as web-based consol telnet command line management. The GE-DSH-82-POE managed switch also features a store and forward switch architecture, an 8K entry address table, a relay alarm for power failure, plus dual power operation, and a redundant backup feature. This powerful industrial managed switch is designed as a user friendly unit, and can provide high powered operation with a fast recovery time of 20ms.
Features
- 8-Port 10/100Base-TX RJ-45
- 2-Port Gigabit TP/SFP combo interface, SFP (Mini-GBIC) supports 100/1000 Dual Mode
- 1 RJ-45 console interface for switch basic management and setup
- Relay alarm for port breakdown, power failure
- Supports 4000 VDC Ethernet ESD protection
- FCC Class A, CE compatibility
- Free-fall, shock and vibration stability
- Provides redundant backup feature and recovery time less than 20ms
- Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z gigabit Ethernet standards
- Supports auto-negotiation and half-duplex/full-duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause-frame flow control (full-duplex) groups, out of 4K VLAN IDs
- Supports spanning tree protocol
- Supports strict priority and Weighted Round Robin (WRR) policies
- Ingress/egress bandwidth control on each port
- IGMP query mode for multicast media application
- Dual power operation; External power supply and DIN rail powered
- IP address security management to prevent unauthorized intruder
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
- Web-based, telnet, console command line management
- Supports LLDP to allow switch to advise its identification and capability on the LAN
Downloads
GE-DSH-82-POE-Specsheet
GE-DSH-82-POE-Installation-Instructions
GE-DSH-82-POE-User-Manual
There are no reviews for this product.
No questions about this product.