For fast and efficient connectivity from the network edge to a backbone switch or server, the IFS 8-port Fast Ethernet Managed Switch Series features eight 10/100Mbps Fast Ethernet ports with 2 Gigabit TP/SFP combo ports. The 2 Gigabit TP/SFP combo ports can support either 10/100/1000Mbps (RJ45) or (1000Base-SX/LX/ BX) through an SFP (Small Form-factor Pluggable) GBIC interface. This series is also available with PoE and PoE+ capabilities.
The NS2503-8P-2C model provides optimized deployment and safe power management of PoE edge devices such as IP Surveillance cameras, access control panels, wireless access points (WAP) and Voice over IP (VoIP). Full power PoE-af (15.4w) is provided to all 8-ports with no power sharing, and added port circuit protection isolates and prevents power interference between ports. In addition to standard IEEE 802.3af (15.4w), the NS2503-8P-2C provides support for up to 5 ports of IEEE 802.3at (30w) PoE.
Features
- Auto-MDI/MDI-X detection
- High performance Store and Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Broadcast/multicast/unicast storm control
- 5.6 Gbps non-blocking switch fabric
- 9K bytes Jumbo frame support
- 8K MAC address table, automatic source address learning and aging
- Full Multicast Support for IP Video
- Up to 256 multicast groups
- VLAN Support
- Up to 255 VLANs groups
- Quality of Service (QoS)
- Auto-detects PoE powered devices (PD)
- Provides full-power PoE on each port - no port sharing
- PoE Management Features
- Supports Cisco ether-Channel (Static Trunk)
- MAC Filtering and Source IP/MAC address port-binding
Downloads
NS2503-8P-2C-Specsheet
NS2503-8P-2C-Quick-Installation-Guide
NS2503-8P-2C-User-Manual
For fast and efficient connectivity from the network edge to a backbone switch or server, the IFS 8-port Fast Ethernet Managed Switch Series features eight 10/100Mbps Fast Ethernet ports with 2 Gigabit TP/SFP combo ports. The 2 Gigabit TP/SFP combo ports can support either 10/100/1000Mbps (RJ45) or (1000Base-SX/LX/ BX) through an SFP (Small Form-factor Pluggable) GBIC interface. This series is also available with PoE and PoE+ capabilities.
The NS2503-8P-2C model provides optimized deployment and safe power management of PoE edge devices such as IP Surveillance cameras, access control panels, wireless access points (WAP) and Voice over IP (VoIP). Full power PoE-af (15.4w) is provided to all 8-ports with no power sharing, and added port circuit protection isolates and prevents power interference between ports. In addition to standard IEEE 802.3af (15.4w), the NS2503-8P-2C provides support for up to 5 ports of IEEE 802.3at (30w) PoE.
Features
- Auto-MDI/MDI-X detection
- High performance Store and Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Broadcast/multicast/unicast storm control
- 5.6 Gbps non-blocking switch fabric
- 9K bytes Jumbo frame support
- 8K MAC address table, automatic source address learning and aging
- Full Multicast Support for IP Video
- Up to 256 multicast groups
- VLAN Support
- Up to 255 VLANs groups
- Quality of Service (QoS)
- Auto-detects PoE powered devices (PD)
- Provides full-power PoE on each port - no port sharing
- PoE Management Features
- Supports Cisco ether-Channel (Static Trunk)
- MAC Filtering and Source IP/MAC address port-binding
Downloads
NS2503-8P-2C-Specsheet
NS2503-8P-2C-Quick-Installation-Guide
NS2503-8P-2C-User-Manual
There are no reviews for this product.
No questions about this product.
