Keri Systems NEUT-5R-KIT Neutron Single Door Kit, Both Enclosures, NXT-5R Reader, PSC-35 Power Supply, (3) NXT-C,(2) NXT-AP, Visual Doors Only

The Keri’s Neutron Controller is a small, low cost, single-door controller. Up to 8 Neutron mini-controllers may be attached to a RS-485 network, originating at a PC or Keri appliance, to control 8 doors with the option of using both in/out readers.

Neutron has been designed with low cost and small physical size in mind, yet maintains a powerful feature set, nearly equal to Keri’s NXT controllers. In fact, Neutron runs on the Visual Doors version of Keri’s Door.NET software and maintains a 1000 credential capacity and a 4,000 event buffer (offline).

The Neutron controller is designed to work with Keri’s NXT readers in both 125kHz and 13.56MHz. Traditional 125 kHz Wiegand readers and keypads are not supported. Supplied inputs and relay outputs are fixed to supporting REX (Request to Exit), DPS (Door Position Switch) and door relay.

Features

• Economical Mini-Controller for a single door
• Works exclusively with Keri’s Visual DoorsTM software
• Networkable via RS-485 for up to 8 controllers
• Supports Keri NXT and NXT-E readers
• Capable of In/Out access using Keri’s a NXT-E reader in conjunction with a standard NXT reader
• 1000 credential capacity
• 4000 Event buffer (offline)
• Equipped with dedicated inputs for REX & Door Sense
• Form "C" Relay for door control
• Configurable for: Lock Time, Auto Unlock by time
• 8 Access Groups configurable per credential
• Same small footprint as Keri’s Intelliprox BlueTM and sharing the same enclosure

Downloads

The Keri’s Neutron Controller is a small, low cost, single-door controller. Up to 8 Neutron mini-controllers may be attached to a RS-485 network, originating at a PC or Keri appliance, to control 8 doors with the option of using both in/out readers.

Neutron has been designed with low cost and small physical size in mind, yet maintains a powerful feature set, nearly equal to Keri’s NXT controllers. In fact, Neutron runs on the Visual Doors version of Keri’s Door.NET software and maintains a 1000 credential capacity and a 4,000 event buffer (offline).

The Neutron controller is designed to work with Keri’s NXT readers in both 125kHz and 13.56MHz. Traditional 125 kHz Wiegand readers and keypads are not supported. Supplied inputs and relay outputs are fixed to supporting REX (Request to Exit), DPS (Door Position Switch) and door relay.

Features

• Economical Mini-Controller for a single door
• Works exclusively with Keri’s Visual DoorsTM software
• Networkable via RS-485 for up to 8 controllers
• Supports Keri NXT and NXT-E readers
• Capable of In/Out access using Keri’s a NXT-E reader in conjunction with a standard NXT reader
• 1000 credential capacity
• 4000 Event buffer (offline)
• Equipped with dedicated inputs for REX & Door Sense
• Form "C" Relay for door control
• Configurable for: Lock Time, Auto Unlock by time
• 8 Access Groups configurable per credential
• Same small footprint as Keri’s Intelliprox BlueTM and sharing the same enclosure

Downloads