The NXT-2D-NE Controller is built for today’s IT environments. By using an existing TCP/IP network, controller cabling costs can be eliminated. Or, if building a new network, they can be reduced up to 50% over traditional hard-wired access systems by using inexpensive, CAT-5 cable. The NXT-2D-NE is designed to be extremely intelligent with little reliance on network traffic for decision making, allowing it to be thrifty with any network’s valuable bandwidth. With Ethernet functionality built directly into the controller, Keri’s proprietary MAC addressing scheme allows for reliable hardware discovery and true one-button autoconfiguration.
Features
- 2 Door/4 Reader Controller for Keri’s NXT product line
- On-board TCP/IP connectivity – no network adapters required
- Manages 2 doors with In/Out capability when using NXT Readers
- Reduce cabling costs over RS-485, Current Loop, or other traditional networking schemes by using shielded CAT-5
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5/6 Network
- Embedded MAC Address for one button
- Auto-Configuration
- Standard 4 Pin Block and RJ-45 Jack built-in for network connection
- Re-assignable Inputs and Outputs
- Quick Disconnect Connectors
- 50,000 Cardholders, 10,000 Event Buffer
- 128 Bit Encryption
The NXT-2D-NE Controller is built for today’s IT environments. By using an existing TCP/IP network, controller cabling costs can be eliminated. Or, if building a new network, they can be reduced up to 50% over traditional hard-wired access systems by using inexpensive, CAT-5 cable. The NXT-2D-NE is designed to be extremely intelligent with little reliance on network traffic for decision making, allowing it to be thrifty with any network’s valuable bandwidth. With Ethernet functionality built directly into the controller, Keri’s proprietary MAC addressing scheme allows for reliable hardware discovery and true one-button autoconfiguration.
Features
- 2 Door/4 Reader Controller for Keri’s NXT product line
- On-board TCP/IP connectivity – no network adapters required
- Manages 2 doors with In/Out capability when using NXT Readers
- Reduce cabling costs over RS-485, Current Loop, or other traditional networking schemes by using shielded CAT-5
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5/6 Network
- Embedded MAC Address for one button
- Auto-Configuration
- Standard 4 Pin Block and RJ-45 Jack built-in for network connection
- Re-assignable Inputs and Outputs
- Quick Disconnect Connectors
- 50,000 Cardholders, 10,000 Event Buffer
- 128 Bit Encryption
There are no reviews for this product.
No questions about this product.
