Panavise 15579 Portagrip Phone Holder with 797-12 Uniflex Mount

The 15579 from Panavise is a portagrip universal phone holder and 797-12, 12” double-wound flex shaft is durable and versatile. Flexible shaft positions exactly to where you need it and stays there.

PortaGrip Phone Holder

• Rubberized indexed grippers and foam backed cradle won’t scratch your device
• Quick release button for easy phone access
• Vertical low profile grips allow full access to touch screens
• Side arms adjust from 2.25' to 3.75' in width to fit nearly any phone
• Ratcheted feet allow for access to data ports
• PanaVise Tilt, Turn & Rotate = fully adjustable
• Low profile design minimizes mount behind phone

797-12 UniFlex Mount, 12'

• Overall mount length (including the shaft) is 12' (304.8mm)
• Patented 'pinch design' prevents the flex shaft from coming loose from the base or the mounting plate
• Rectangular AMPS pattern: 30mm x 38mm (1.181' x 1.496') on center
• We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
• Knob and set-screw adjusting options included
• Double wound shaft, vinyl coated for heavy-duty protection
• Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
• Screw caps included for a finished look

The 15579 from Panavise is a portagrip universal phone holder and 797-12, 12” double-wound flex shaft is durable and versatile. Flexible shaft positions exactly to where you need it and stays there.

PortaGrip Phone Holder

• Rubberized indexed grippers and foam backed cradle won’t scratch your device
• Quick release button for easy phone access
• Vertical low profile grips allow full access to touch screens
• Side arms adjust from 2.25' to 3.75' in width to fit nearly any phone
• Ratcheted feet allow for access to data ports
• PanaVise Tilt, Turn & Rotate = fully adjustable
• Low profile design minimizes mount behind phone

797-12 UniFlex Mount, 12'

• Overall mount length (including the shaft) is 12' (304.8mm)
• Patented 'pinch design' prevents the flex shaft from coming loose from the base or the mounting plate
• Rectangular AMPS pattern: 30mm x 38mm (1.181' x 1.496') on center
• We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
• Knob and set-screw adjusting options included
• Double wound shaft, vinyl coated for heavy-duty protection
• Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
• Screw caps included for a finished look