Model:
Pelco DSSRV2-200-EUK Digital Sentry Network Video Recorder with RAID Configuration, 20TB
SKU:
DSSRV2-200-EUK
Availability:
In Stock
$8,545.15
  0 reviews
Condition: New Brand: Pelco NDAA Compliance: Yes Resolution: 3840 x 2160 per DisplayPort output (2x), 1920 x 1200 @ 60 hz on DVI-D output, 1920 x 1200 @ 60 hz on VGA output Operating temperature: 10° to 35°C (50° to 95°F) IP Channels: 128 Channels Harddrive Size: 20TB Protocols: Pelco Protocols Features: Audio, Compression Supported, H.264 Compression, MJPEG Compression, MPEG-4 Compression Compression: H.264, MJPEG, MPEG-4 Dimensions: 50.8 x 43.4 x 8.9 cm (20" D x 17.1" W x 3.5" H) Video Standard/Format: 60 Hz capable for NTSC, 75 Hz capable for PAL Voltage: 100 to 240 VAC, 50/60 Hz, autoranging Network: Gigabit Ethernet (1000Base-T) ports (2x) USB: 3 USB 2.0 ports (1 front, 2 rear), 2 USB 3.0 ports (rear) H.264 Compression: Yes MJPEG Compression: Yes MPEG-4 Compression: Yes

Pelco DSSRV2-200-EUK | Compression Supported | MJPEG Compression | 4TB storage drives provide 33% more storage over DSSRV 3TB models at no additional cost. Buy Now. Fast Shipping.

The Digital Sentry Network Video Recorder (DSSRV2 NVR) is optimized by Pelco to deliver the essential hardware support for the DS NVs video management software (VMS) without the extra cost or risk of integrating hardware and software. Boosted by the 4th Generation Intel Xeon processor and 8 GB of RAM, DSSRV2 NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5516 direct-attached encoder. Analog streams are also supported using Pelco and third-party encoders. The DSSRV2 NVR boasts total throughput of up to 350 Mbps (300 Mbps for JBOD models) for recording analog and IP video streams as well as playback and export through the DS ControlPoint client. The increased data rate over original DSSRV models allows more users to play back video from the server simultaneously. When determining the maximum number of cameras and the desired frame rate to host on each system, the number of concurrent client connections, the number of streams played back per client, and the bandwidth required for client connections must be considered. The DSSRV2 NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR. Two gigabit network ports provide for convenient network architecture planning by allowing one port to be dedicated to IP cameras, while the second network port is used for client connections. Two DVI-D ports provide a convenient connection for high resolution digital monitors for use with HD cameras.

Features

  • Increased data rate of up to 350 Mbps (RAID) or 300 Mbps (JBOD) total throughput, allowing the server to support more users and play back more cameras simultaneously than previous DSSRV models
  • 4TB storage drives provide 33% more storage over DSSRV 3TB models at no additional cost; systems previously utilizing two or more servers can now be built on a single server
  • SSD system drive, with increased read-write speeds and no moving parts, increases overall system responsiveness and reliability
  • Supports up to 128 IP Camera Streams; up to 64 Analog Cameras*
  • Records H.264, MJPEG, and MPEG-4 IP Streams
  • Supports Pelco and Third-Party IP Cameras and Network Encoders
  • Compatible with DS ControlPoint for Simultaneous Monitoring of All DS Series and DX Series Products in a Single Client Interface
  • Network Health and Event Monitoring Support Through SNMP and New Digital Sentry System Information (DSSI) Utility
  • Compatible with the DS Archive Utility
  • Recording Rate Configurable per Individual Camera

Downloads

  DSSRV2-200-EUK-Specsheet

  DSSRV2-200-EUK-Manual

Pelco DSSRV2-200-EUK | Compression Supported | MJPEG Compression | 4TB storage drives provide 33% more storage over DSSRV 3TB models at no additional cost. Buy Now. Fast Shipping.

The Digital Sentry Network Video Recorder (DSSRV2 NVR) is optimized by Pelco to deliver the essential hardware support for the DS NVs video management software (VMS) without the extra cost or risk of integrating hardware and software. Boosted by the 4th Generation Intel Xeon processor and 8 GB of RAM, DSSRV2 NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5516 direct-attached encoder. Analog streams are also supported using Pelco and third-party encoders. The DSSRV2 NVR boasts total throughput of up to 350 Mbps (300 Mbps for JBOD models) for recording analog and IP video streams as well as playback and export through the DS ControlPoint client. The increased data rate over original DSSRV models allows more users to play back video from the server simultaneously. When determining the maximum number of cameras and the desired frame rate to host on each system, the number of concurrent client connections, the number of streams played back per client, and the bandwidth required for client connections must be considered. The DSSRV2 NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR. Two gigabit network ports provide for convenient network architecture planning by allowing one port to be dedicated to IP cameras, while the second network port is used for client connections. Two DVI-D ports provide a convenient connection for high resolution digital monitors for use with HD cameras.

Features

  • Increased data rate of up to 350 Mbps (RAID) or 300 Mbps (JBOD) total throughput, allowing the server to support more users and play back more cameras simultaneously than previous DSSRV models
  • 4TB storage drives provide 33% more storage over DSSRV 3TB models at no additional cost; systems previously utilizing two or more servers can now be built on a single server
  • SSD system drive, with increased read-write speeds and no moving parts, increases overall system responsiveness and reliability
  • Supports up to 128 IP Camera Streams; up to 64 Analog Cameras*
  • Records H.264, MJPEG, and MPEG-4 IP Streams
  • Supports Pelco and Third-Party IP Cameras and Network Encoders
  • Compatible with DS ControlPoint for Simultaneous Monitoring of All DS Series and DX Series Products in a Single Client Interface
  • Network Health and Event Monitoring Support Through SNMP and New Digital Sentry System Information (DSSI) Utility
  • Compatible with the DS Archive Utility
  • Recording Rate Configurable per Individual Camera

Downloads

  DSSRV2-200-EUK-Specsheet

  DSSRV2-200-EUK-Manual

Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products