Seco-Larm ENFORCER-295 Alarm Control Panel

The Alarm Control Panel, 5 zone shunting switches correspond to separate inputs (super-high-transient protected), 3 adjustable timers, 9 status LEDs (all visisble when cabinet is closed), 2 alert signals for entry and exit delay, multi-remote arm/disarm with report output, tamper dry relay contact panic output (C-N.O.), positive voltage (3 Amp) regulated power supply recharger, heavy-duty beige colored steel cabinet, included.

Features

5 inputs

• N.O. or N.C. (selectable) instant delay
• N.C. delay delays
• N.O. 24-hour delays
• N.C. trigger delay

5 the inputs. Shunt out any that not working properly prevent false alarms. All are super-high-transient protected. timers

• Entry timer from 1 sec 45 sec
• Exit sec
• Alarm duration 20 min

9 LEDs

• Individual green LEDs
• Total LED. Indicates total of five zones
• Arm/disarm/shunt red if armed, disarmed, a has been shunted
• Entry/Exit yellow in mode
• Primary AC on off
• All visible closed

2 delay

• Exit delay: pulsed during delay
• Entry constant delay
• Patented Automatic Extended (A.E.E.D.): Opening switch/sensor connected an before elapses automatically extends as long remains open
• Fail-safe circuitry: cannot be armed unless all sensors unshunted zones their non-violated state
• Phase-II continual protection: assure continuous protection, input triggered after elapsed will shut down. other remain armed
• Multi-remote arm/disarm: Allows installation up 10 arming/disarming devices
• Arm/disarm output: Sends 100mA transistor ground signal indicate disarmed
• Tamper activated
• Dry (C. - N.O.): contacts close activated
• Positive Powers signaling devices like siren, bell, dialer, etc.
• Works 16V AC/DC back-up battery input
• Use DC adapter Class-II transformer
?
• Regulated recharger
• Heavy-duty, beige-colored cabinet: Measures 81/2'x31/8'x117/16' (215x79x290 mm)
• Detachable front cover cabinet
• 2 included: Detects opened removed wall