Model:
Macurco 24V-Boiler-CO-Package 24V GBC Boiler CO Package
SKU:
24V-Boiler-CO-Package
Availability:
In Stock
$1,850.00
  0 reviews
Condition: New Brand: Macurco NDAA Compliance: No

The Gas Boiler Controller (GBC) used in conjunction with Macurco Gas detectors is used to shut down boilers in the presence of gas. Using a single detector or up to four gas detectors the controller can control up to 8 dry contact outputs. These outputs are designed to shut down the boiler system upon the detection of carbon monoxide and/or combustible gases such as natural gas or propane. If the detectors are programmed in latching mode then utilizing the Gas Boiler Controller you can reset the power to disengage the latched relay. The Gas Boiler Controller has a green power light, a red alarm light, a boiler reset button and an audible buzzer.

Features

  • Gas Boiler Controller
  • Power Source: 120VAC
  • 4 Relays
  • 32 to 125 deg F Operating Temperature
  • Ambient Humidity: 0 - 95% RH Non-Condensing
  • Alarm: Buzzer
  • 90 dBA at 1 ft Sound Level
  • Status Indicators: Green Light - Powered Up, Red Light - Alarm Condition
  • Jumper Settings
  • NEMA 4X/6P (IP66/68) Enclosure
  • Dimensions: 9.8 x 8 x 4-1/2 in
  • Shutdown up to 8 boilers individually via expansion relays
  • Customize up to 8 10A SPDT Relays (sets of 2)
  • Customize up to 4 expansion relay boards
  • 24 VDC driver for horn/strobe
  • Opaque Polycarbonate, NEMA 4X/6P (IP66/68)
  • Audible buzzer
  • Output power supports up to 4 detectors

Downloads

  Gas-Boiler-Controller-Specsheet

  Gas-Boiler-Controller-Operation-Manual

The Gas Boiler Controller (GBC) used in conjunction with Macurco Gas detectors is used to shut down boilers in the presence of gas. Using a single detector or up to four gas detectors the controller can control up to 8 dry contact outputs. These outputs are designed to shut down the boiler system upon the detection of carbon monoxide and/or combustible gases such as natural gas or propane. If the detectors are programmed in latching mode then utilizing the Gas Boiler Controller you can reset the power to disengage the latched relay. The Gas Boiler Controller has a green power light, a red alarm light, a boiler reset button and an audible buzzer.

Features

  • Gas Boiler Controller
  • Power Source: 120VAC
  • 4 Relays
  • 32 to 125 deg F Operating Temperature
  • Ambient Humidity: 0 - 95% RH Non-Condensing
  • Alarm: Buzzer
  • 90 dBA at 1 ft Sound Level
  • Status Indicators: Green Light - Powered Up, Red Light - Alarm Condition
  • Jumper Settings
  • NEMA 4X/6P (IP66/68) Enclosure
  • Dimensions: 9.8 x 8 x 4-1/2 in
  • Shutdown up to 8 boilers individually via expansion relays
  • Customize up to 8 10A SPDT Relays (sets of 2)
  • Customize up to 4 expansion relay boards
  • 24 VDC driver for horn/strobe
  • Opaque Polycarbonate, NEMA 4X/6P (IP66/68)
  • Audible buzzer
  • Output power supports up to 4 detectors

Downloads

  Gas-Boiler-Controller-Specsheet

  Gas-Boiler-Controller-Operation-Manual

Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products