Spec Sheet
Applications
The screw clamp is the most recognized and widely used connection technology. Entrelec by ABB’s screw clamp connections are strong and secure and also, mount on industry standard DIN rails.
Features
- Sub-function: 2 clamps, Screwless rail connection
- Improve the safety of installation in the event of a short-circuit by screw less rail contact: rail contact non operator dependent, performances above the requirements of IEC 60947-7-2 terminal block standard, secured snap on or remove from the rail
- Numerous Functions
- Self-Locking Clamp Design
- Funneled Side Entry for up to Two Ferruled or Non-Ferruled Solid or Stranded Wires
- Wide Range of Wire Sizes from 24 AWG to 2 AWG, Solid or Stranded
- Terminal Block Spacing Range of 5 mm to 160.5 mm
- Current Carrying Capacity up to 310 Amps with Rated Voltages Ranging from 300 to 600
- IP20 Protection (Touch-Safe)
- Complete Line of Accessories, Marking Systems & Ferrules and Tools
Specification Description
Wire Size: Rigid: (1) 24 - 10 AWG (UL 1059), Flexible: (1) 24 - 10 AWG (UL 1059), Flexible With Non Insulated Ferrule: (1) 24 - 12 AWG, Flexible With Insulated Ferrule: (1) 24 - 12 AWG
Spacing: 5.2 mm
Amperage Rating: 720 A At 1 sec Short-Time Withstand
Color: Green/Yellow
Mounting: DIN Rail: TH35-15 (35 Length X 15 mm Width), TH35-7.5 (35 Length X 7.5 mm Width)
Connection: Screw Clamp
Size: 6 mm Width X 59.5 mm Height X 47.4 mm Depth
Flammability: V0 (UL94)
Overvoltage Category: III
Pollution Degree: 3
Impulse Withstand Voltage: 8 kV
Wire Strip Length: 0.413 in.
Operating Temperature: -5 To +40 deg C
Dielectric Test Voltage: 2200 V
Screw Driver Size: 0.157 in. Flat
Insulation: Polyamide
Tightening Torque: 7.52 in-lb
Gauge Type: A4-B3
Tech Info
UL Listed, CSA, ATEX, CB, CE, GOST Certified, IECEx Approved, RoHS Compliant
Technical
There are no reviews for this product.
No questions about this product.
