TRANSITION NETWORKS S6010-1040-SA S6010 Series T1/E1 to Fiber Network Interface Device, Port One: Twisted Pair RJ48 [1.5 km/0.9 mi], Port Two: SFP Slot Empty , SA

Features

• Remote in-band management
• Copper or fiber, local or remote loopbacks
• Switch selectable for T1 or E1
• Remote firmware upgrade
• LEDs for immediate visual status
• Supports dual or single fiber
• Supports multimode and single-mode fiber at a variety of distances
• Supports CWDM SFPs
• SNMP management when used with ION chassis and management module
• Remote standalone can be managed by local peer
• Extend PRI over fiber

Specification Description

Item: T1/E1 to Fiber Network Interface Device
Copper Connectors: RJ48, BNC
Fiber Connectors: SFP: LC Connector Uses Standard 100BASE-X/OC-3 SFP; Fixed Optics: ST or SC Connector
Data Rate: T1 = 1.544 Mbps; E1 = 2.048 Mbps
Status LEDs: Power, Signal Dect Copper, Signal Detect Fiber
Power Consumption: 2.6 Watt
Power: Input: 100 - 240 Volt AC; Output: 12 Volt DC
Environmental Conditions: -10 to 65 deg C Operating Temperature; 5 - 95% Operating Humidity Non-Condensing; 0 - 10000 ft Altitude
MTBF Witut Power Supply: >250000 Hour (MIL-HDBD-217F), >687000 Hour (Bellcore)
Port One: Twisted Pair (RJ48) [1.5 km/0.9 mi]
Port Two: SFP Slot (Empty)
Dimension: 3.250 Inch Width x 6.500 Inch Depth x 1.000 Inch Height

Tech Info

ANSI T1.102, T1.402 and T1.408, ITU I.431, G.703, G.736, G.775 and G.823, ETSI 300-166, 300-233 and TBR12/12- CISPR/EN55022 Class A- FCC Class A- CE Mark, UL60950