TRANSITION NETWORKS S6210-3013-LA S6210 Series DS3-T3/E3 Coax to Fiber Network Interface Device, Port One: 2 Coax BNC , Port Two: 1300 nm Multimode SC [2 km/1.2 mi], LA

Applications

For integrate voice and data on fiber network

Features

• AIS (Alarm Indication Signal)
• Coax line build out
• Switch selectable for DS3/T3 or E3
• Remote firmware upgrade
• Loopback - Coax and fiber
• LEDs for immediate visual status
• Supports dual or single fiber
• Supports multimode and single-mode fiber at a variety of distances
• Supports CWDM SFPs
• SNMP management when used with ION chassis and management module
• Remote standalone can be managed by local peer

Specification Description

Item: DS3-T3/E3 Coax to Fiber Network Interface Device
Multimode: Min TX PWR: -19.0 dBm, Max TX PWR: -14.0 dBm, RX Sensitivity: -30.0 dBm, Max In PWR: -14.0 dBm, Link Budget: 11.0 dB
Coax Connectors: 75 Ohm Coax
Fiber Connectors: SFP: LC Connector Uses Standard 100BASE-X/OC-3 SFP; Fixed Optics: ST or SC Connector
Data Rate: DS3/T3 = 44.7 Mbps; E3 = 34.4 Mbps
Status LEDs: Power, Coax Link Status, Coax Loop-Back Status, AIS On Coax Link, Fiber Link Status, Fiber Loop-Back Status, AIS On Fiber Link
Power Consumption: 2.4 Watt
Power: Input: 100 - 240 Volt AC; Output: 12 Volt DC
Environmental Conditions: -10 to 65 deg C Operating Temperature; 5 - 95% Operating Humidity Non-Condensing; 0 - 10000 ft Altitude
MTBF With Power Supply: >41660 Hour (MIL-HDBD-217F), >114580 Hour (Bellcore)
MTBF Without Power Supply: >250000 Hour (MIL-HDBD-217F), >687000 Hour (Bellcore)
Port One: (2) Coax (BNC)
Port Two: 1300 nm Multimode (SC) [2 km/1.2 mi]
Dimension: 3.500 Inch Width x 6.500 Inch Depth x 1.000 Inch Height

Tech Info

ANSI, ITU-TS, ETSI, G.823 For Jitter Tolerance, G.755 For Loss Of Signal- Regulatory Compliance- CISPR/EN55022 Class A- FCC Class A- CE Mark, UL60950