TRENDnet TFC-1000S10D5 1000Base-T to LX Dual Wavelength Fiber

Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber Converter (10km/6.2miles).

The TFC-1000S10D5 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 10km (6.2 miles). This module must be used with the TFC-1000S10D3 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port.

• Must use with TFC-1000S10D3
• SC-type dual-wavelength single-mode fiber port connects over distances of up to 10km(6.2miles)
• 1000Base-T Gigabit copper port supports Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fiber chassis
• 1 x 1000Base-T RJ-45 port
• 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
• Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Support LLR (link Loss Return) for FX port
• Monitor and configure Ethernet or Fiber's duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600
• Status LED indicators for Power and Link/Activity
• Wall mountable
• Optional 19' system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters

Downloads

Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber Converter (10km/6.2miles).

The TFC-1000S10D5 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 10km (6.2 miles). This module must be used with the TFC-1000S10D3 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port.

• Must use with TFC-1000S10D3
• SC-type dual-wavelength single-mode fiber port connects over distances of up to 10km(6.2miles)
• 1000Base-T Gigabit copper port supports Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fiber chassis
• 1 x 1000Base-T RJ-45 port
• 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
• Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Support LLR (link Loss Return) for FX port
• Monitor and configure Ethernet or Fiber's duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600
• Status LED indicators for Power and Link/Activity
• Wall mountable
• Optional 19' system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters

Downloads