InBio-series IP-Based Biometric Access Control Panel
InBio carries out the matching of fingerprints on the panel, itself. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a database. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily.
InBio controller firmware can be upgraded in the field. InBio panels stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events/transactions. InBio is backed up in real-time to an onboard SD card. Data is preserved if power is lost. InBio continues to operate if the network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxiliary Input/output Linkages are built into the InBio controller’s firmware.
FR1500-ID flush-mount slave fingerprint and prox card reader
Features
US-inBio-460 Features
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- The Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevator Control for total security system
- Easy-to-use and intuitive programming with ZKTeco Software
- System management by the browser from client PCs. No need to install software on each client
- Programming of special logic between doors is set up with simple pull-down menus. No special scripts or code is required
- Management software allows indication of real-time door status and remote commanding of door open/close state
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode
FR1500-ID Features
- Reliable, durable and highly accurate FLUSH-MOUNT slave fingerprint reader, now with our next generation SilkID sensor
- FR1500-ID primarily connects with InBio panels. It also connects to stand-alone readers for doors needing both ingress & egress
- FR1500-ID is also IP65-rated and ideal for outdoor applications
- FR1500-ID also includes an internal ZKTeco prox card reader. Options exist for HID and Mifare
Downloads
InBio460-Pro-Specsheet
FR1500-Specsheet
InBio460-Pro-Installation-Guide
FR1500-Installation-Guide
InBio-series IP-Based Biometric Access Control Panel
InBio carries out the matching of fingerprints on the panel, itself. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a database. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily.
InBio controller firmware can be upgraded in the field. InBio panels stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events/transactions. InBio is backed up in real-time to an onboard SD card. Data is preserved if power is lost. InBio continues to operate if the network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxiliary Input/output Linkages are built into the InBio controller’s firmware.
FR1500-ID flush-mount slave fingerprint and prox card reader
Features
US-inBio-460 Features
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- The Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevator Control for total security system
- Easy-to-use and intuitive programming with ZKTeco Software
- System management by the browser from client PCs. No need to install software on each client
- Programming of special logic between doors is set up with simple pull-down menus. No special scripts or code is required
- Management software allows indication of real-time door status and remote commanding of door open/close state
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode
FR1500-ID Features
- Reliable, durable and highly accurate FLUSH-MOUNT slave fingerprint reader, now with our next generation SilkID sensor
- FR1500-ID primarily connects with InBio panels. It also connects to stand-alone readers for doors needing both ingress & egress
- FR1500-ID is also IP65-rated and ideal for outdoor applications
- FR1500-ID also includes an internal ZKTeco prox card reader. Options exist for HID and Mifare
Downloads
InBio460-Pro-Specsheet
FR1500-Specsheet
InBio460-Pro-Installation-Guide
FR1500-Installation-Guide
There are no reviews for this product.
No questions about this product.