Appleton EY 25% Relleno vertical y horizontal tubo para cables

The Appleton EY 25% fill conduit sealing fitting is designed to prevent the passage of gases, vapors, or flames from one part of a conduit system to another. It also restricts the accumulation of ignitable gases or vapors, helping to confine explosive pressure within the sealed enclosure.

These fittings are explosionproof, dust-ignitionproof, and raintight, making them suitable for use in hazardous environments classified as Class I and II locations.

• A prueba de explosiones, a prueba de polvo y de lluvia
• Previene el paso de gases, vapores o llamas entre secciones tubo para cables
• Restringe la propagación de la explosión al gabinete sellado
• Suitable for Class I, Division 1 and 2 locations within 18 inches of enclosures containing arc, spark, or high-temperature devices
• Required where 2-inch or larger conduit enters an enclosure or at the boundary of classified locations
• Designed for conduit connections within 36 inches, with seal placement within 18 inches of enclosures
• Compatible with cables exceeding gas or vapor transmission rates permitted for seals in Class I, Division 2 locations
• Features a smooth, rounded integral bushing in each hub to protect conductor insulation
• Las roscas cónicas y exactamente roscadas aseguran uniones rígidas y rígidas y continuidad del suelo
• Removable nipple can be used in either the top or bottom hub
• UL Listado para su uso con KwikoTM A compuesto de sellado y ciertos cementos de sellado
• Close radius design for vertical or horizontal conduit runs

Especificaciones técnicas

Documentos del producto