Ashly KLR-5000 Two-Channel High Performance Amplifier

The Ashly KLR-5000 is a two-channel high performance amplifier with a power rating of 1000W at 8 Ohms stereo, 5000W max output in bridged mono mode. The amplifier has a current draw of 1.14A when all channels are driven at 4Ω, with higher values under specific load conditions. It features a 2 step class H circuit and online thermal dissipation ratings. The frequency response is +0.3dB from 20Hz to 20kHz at 1W @ 8Ω. The signal-to-noise ratio is greater than 110dB. The damping factor is over 380 at 100Hz @ rated power @8Ω. Total harmonic distortion is 10dB below rated output at 4Ω. The impedance is 12 kΩ, balanced. It includes a high-pass filter with options at 30Hz and 50Hz. Protection features include output over current, DC output, chassis temperature, and mains breaker. Cooling is achieved through a variable speed fan and front-to-rear air flow.

• Power Rating: 8Ω, 20Hz-20kHz, 1% THD: 1000W 4Ω, 20Hz-20kHz, 1% THD: 1700W 2Ω, 20Hz-20kHz, 1% THD: 2500W Bridged mono mode: 4Ω, 20Hz-20kHz, 1% THD: 5000W
• Current Draw: All channels driven @ 4Ω Idle: 1.14A 1/8th power pink noise: 17.5A 1/3 power sine wave: 24.7A S/N (20Hz-20kHz, unweighted): >110dB
• Circuit: 2 step class H
• Online Thermal Dissipation: All channels driven @ 4Ω Idle (BTU/ hr): 215 1/8th power pink noise (BTU/ hr): 3111 1/3 power sine wave (BTU/ hr): 4395 Input gain switch: 1.4V, 26dB, 32dB
• Frequency Response: 1W @ 8Ω 20Hz-20kHz (-3dB down point): +0.3dB 5Hz-70kHz