BSS Audio BLU-50v2 4x4 Signal Processor with BLU Link

BSS Audio BLU-50v2 4x4 Signal Processor with BLU Link features 4 analog inputs with 48V phantom power and 4 analog outputs.

BSS Audio BLU-50v2 4x4 Signal Processor with BLU Link features 4 analog inputs with 48V phantom power and 4 analog outputs. It includes indicators for signal present, clip, 48V (input only), COM, STAT, ERR, PWR. The device has 12 control inputs and 6 outputs with specific voltage and impedance requirements. It supports POE+ and POE++ power options, operates within a temperature range of 32 to 113°F, and has dimensions of 1.6 x 8.6 x 7.8" and weighs 2.8 lb.

• Indicators: Per Input: Signal Present, CLIP, 48V (Input Only) Other: COM, STAT, ERR, PWR
• Analog Inputs: Analog Inputs: 4 Electronically Balanced on Phoenix Mini Combicon Removable Screw Connectors Mic/Line Inputs: Nominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps Input Impedance: 3.5 Kilohms Maximum Input Level: +20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain CMRR: > 55 dB at 1 kHz Input Noise (E.I.N.):
• Analog Outputs: Analog Outputs: 4 Electronically Balanced on Phoenix Mini Combicon Removable Screw Connectors Maximum Output Level: +20 dBu Frequency Response: 20 Hz to 20 kHz (+0.5 dB / -1 dB) THD: 0.005% Typical at +4 dBu, 1 kHz, 0 dB Input Gain Dynamic Range: 110 dB A-Weighted, > 107 dB Unweighted Crosstalk:
• Control Ports: Control Ports: 12 Inputs and 6 Outputs Control Input Voltage: 0 to 4.5 V Control Input Impedance: 4.7 Kilohms to +5 V (2-Wire Mode), >1 Megohm (3-Wire Mode) Logic Output Voltage: 0 or +5 V Unloaded Logic Output Impedance: 440 Ohms Logic Output Current: 10 mA Source, 60 mA Sink
• WatchDog: Watchdog Output: Phoenix/Combicon Connector for Fail-Safe Control Opto Output Current: 14 mA Withstanding Voltage: 80 V Maximum (Off) Series Impedance: 220 Ohms (Isolated)