Modelo:
EPSLED-80-STB-MS-SOL-80C-C1D2-20CSKU:
EPSLED-80-STB-MS-SOL-80C-C1D2-20CDisponibilidad:
En stockDocumentos:
Hoja de especificaciones
$8,061.80
Precio estimado. El precio final y la disponibilidad están sujetos a confirmación. Póngase en contacto con nuestro equipo de ventas para obtener un presupuesto actual.
Resumen del producto
C1D1 Solar Powered Explosion Proof LED Indicator Light - 80' Cord - C1D2 Panel - Occupancy Sensor is a product intended for professional commercial and industrial applications.
Especificaciones clave
- Beneficios del LED: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
- Sensor de movimiento: This system is equipped with a low voltage explosion proof motion sensor that is ideal for use in hazardous areas designated Class I, Division 1 and Class II, Division 1. This occupancy sensor can be mounted at heights ranging from 10` up to 20` above the ground and provides up to 15` by 15` coverage when mounted at 16`. The entire unit is constructed of copper free non-sparking aluminum construction with a glass window for motion detection.
- Power/Wiring: This EPSLED-80-STB-MS-SOL-80C-C1D2-20C is powered by four 12V AC 18aH sealed lead acid batteries that are recharged by the solar panel. These rechargeable batteries provide a continuous supply of steady, reliable power. The lead acid battery pack is contained within the solar panel, not the light. This fixture ships with 80 feet of 10/2 SOOW cord that connects the explosion proof light to the solar panel. A 10-foot 16/3 SOOW cord is also available for connection between the light fixture and sensor. Custom lengths are available upon request. Please contact us for special requirements.
- Montaje: El EPSLED-80-STB-MS-SOL-80C-C1D2-20C se ofrece con montaje en techo o pared para la luz. El sensor de movimiento viene con un soporte de montaje integral para el montaje en pared, que se puede ajustar -90° a +30° verticalmente después de la instalación.
- NOTE: Larson Electronics has further upgraded the options available with this light. We expect the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight (not in the hazardous area) while the light is mounted in a hazardous area workspace. Standard installation for explosion proof lighting, including threaded rigid pipe to the LED light fixture and appropriate seal-offs, etc. are required.
- Aplicaciones sugeridas: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, remote locations and more.
Este artículo está agrupado con luces LED.
Antes de ordenar: Verifique las calificaciones, dimensiones, compatibilidad y requisitos de instalación antes de realizar el pedido.
Especificaciones
Beneficios del LED
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
Sensor de movimiento
This system is equipped with a low voltage explosion proof motion sensor that is ideal for use in hazardous areas designated Class I, Division 1 and Class II, Division 1. This occupancy sensor can be mounted at heights ranging from 10` up to 20` above the ground and provides up to 15` by 15` coverage when mounted at 16`. The entire unit is constructed of copper free non-sparking aluminum construction with a glass window for motion detection.
Montaje
El EPSLED-80-STB-MS-SOL-80C-C1D2-20C se ofrece con montaje en techo o pared para la luz. El sensor de movimiento viene con un soporte de montaje integral para el montaje en pared, que se puede ajustar -90° a +30° verticalmente después de la instalación.
Nota
Larson Electronics has further upgraded the options available with this light. We expect the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight (not in the hazardous area) while the light is mounted in a hazardous area workspace. Standard installation for explosion proof lighting, including threaded rigid pipe to the LED light fixture and appropriate seal-offs, etc. are required.
Energía/Alambre
This EPSLED-80-STB-MS-SOL-80C-C1D2-20C is powered by four 12V AC 18aH sealed lead acid batteries that are recharged by the solar panel. These rechargeable batteries provide a continuous supply of steady, reliable power. The lead acid battery pack is contained within the solar panel, not the light. This fixture ships with 80 feet of 10/2 SOOW cord that connects the explosion proof light to the solar panel. A 10-foot 16/3 SOOW cord is also available for connection between the light fixture and sensor. Custom lengths are available upon request. Please contact us for special requirements.
Solicitudes sugeridas
Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, remote locations and more.
Reseñas: 0
Este producto no tiene opiniones.
Preguntas: 0
No hay preguntas sobre este producto.
Hoja de especificaciones 97.71 KB
Mapa del tiempo de envío 424.5 KB
Productos similares
