Sennheiser In-Ceiling Audio Conferencing Solution Kit with Mic Array, Processor, Amp & Speaker

The Sennheiser In-Ceiling Audio Conferencing Solution Kit provides all-in-one audio for small and medium rooms.

The Sennheiser In-Ceiling Audio Conferencing Solution Kit provides all-in-one audio for small and medium rooms. This kit includes a microphone array, processor, amplifier, and speaker. The audio output features 1 x 3-Pin Terminal (Fits Phoenix Contact MCVW 1.5-3-ST-3.81) and 2 x Digital Dante Network Audio (RJ-45 Primary and Secondary). Ethernet control is available via 1 x RJ-45 Ethernet Port for PoE Power Supply and Data/Control Communication.

The supply voltage is 44 to 57 VDC PoE IEEE 802.3af Class 3. Maximum power consumption is 8.8 W. The plenum rating is Tested According to UL 2043. The transducer principle uses Pre-Polarized Condenser Microphone. AF Frequency Response ranges from 160 Hz to 18 kHz. Sensitivity is 0 dBV/Pa (988 mV/Pa). Signal to Noise Ratio is 83 dB (A). Latency is 4 ms. Equivalent Noise Level is 11 dB (A). Polar Pattern (Microphone) includes 28 Capsules.

• Audio Output: 1 x 3-Pin Terminal (Fits Phoenix Contact MCVW 1.5-3-ST-3.81) 2 x Digital Dante Network Audio (RJ-45 Primary and Secondary)
• Ethernet Control: 1 x RJ-45 Ethernet Port for PoE Power Supply and Data/Control Communication
• Supply Voltage: 44 to 57 VDC PoE IEEE 802.3af Class 3
• Power Consumption: Maximum 8.8 W
• Plenum Rating: Tested According to UL 2043