Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets

The Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets is designed for fixed conference installations.

The Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets is designed for fixed conference installations. It features 28 capsules and includes a 3-pin terminal for audio output, two digital Dante network audio ports, an Ethernet port for PoE power supply and data communication, and a supply voltage of 44 to 57 VDC PoE IEEE 802.3af Class 3. The device consumes a maximum of 8.8 W of power and is rated according to UL 2043 for plenum use.

It utilizes pre-polarized condenser microphones with an AF frequency response of 160 Hz to 18 kHz, a sensitivity of 0 dBV/Pa (988 mV/Pa), a signal-to-noise ratio of 83 dB (A), and a latency of 4 ms. The equivalent noise level is 11 dB (A).

• Audio Output: 1 x 3-Pin Terminal (Fits Phoenix Contact MCVW 1.5-3-ST-3.81) 2 x Digital Dante Network Audio (RJ-45 Primary and Secondary)
• Ethernet Control: 1 x RJ-45 Ethernet Port for PoE Power Supply and Data/Control Communication
• Supply Voltage: 44 to 57 VDC PoE IEEE 802.3af Class 3
• Power Consumption: Maximum 8.8 W
• Plenum Rating: Tested According to UL 2043