Hoja de especificacionesThe Square D PowerLogic HDPM6000 is a multi-circuit energy meter designed for detailed power analysis and asset management. It supports waveform capture and total harmonic distortion measurement, providing accurate data for energy management systems.
Equipped with 128 samples per cycle and 8 GB of memory, this device ensures reliable data collection. It supports multiple communication protocols including TCP/IP, Modbus, SNMP, and BACnet, and features various measurement capabilities such as active, reactive, apparent power, and power factor across different voltage levels.
- Rated for 60 Hz network frequency
- Measurement accuracy of +/- 1%
- Supports 2P + E, 3P + E, and 3P + N + E pole configurations
- Measurement voltage range from 120 V to 480 V AC at 60 Hz
- Includes web services for real-time data viewing and waveform analysis
Especificaciones técnicas
| Frecuencia de la red | 60 Hz |
| Gestión de la energía | asset management || measurement || cost management |
| [Us] Rated Supply Voltage | 24 V DC |
| Power Quality Analysis | waveform capture || total harmonic distortion |
| Variant | equipped |
| Type Of Measurement | current per channel || current all channels || active energy per channel || active energy all channels || active power per channel || active power all channels || apparent power per channel || apparent power all channels || reactive power per channel || reactive power all channels || frequency || power factor per channel || power factor average |
| Product Or Component Type | multi-circuit energy meter |
| Nombre del producto | PowerLogic HDPM6000 |
| Device Short Name | HDPM6000 |
| Intervalo | PowerLogic |
| Complementary - Communication Port Support | 2 RJ45 Ethernet || RS485 screw block terminal || I/O bus RJ45 |
| Complementary - Measurement Accuracy | +/- 1 % |
| Complementary - Measurement Voltage | 120-120 V AC 60 Hz || 208-208 V AC 60 Hz || 380-380 V AC 60 Hz || 400-400 V AC 60 Hz || 415-415 V AC 60 Hz || 480-480 V AC 60 Hz |
| Complementary - Sampling Rate | 128 samples/cycle |
| Complementary - Memory Capacity | 8 GB |
| Complementary - Communication Port Protocol | TCP/IP || Modbus || SNMP || BACnet |
| Complementary - Poles Description | 2P + E || 3P + E || 3P + N + E |
| Complementary - Analogue Input Type | external CT || Rogowski coil |
| Complementary - Web Services | web page || controller configuration || viewing of captured waveform || real time viewing of data |
| Complementary - Communication Of Data | power quality || reading of measurements || percentage of load |
| Complementary - Provided Equipment | strip module 2 21-circuit left || strip module 2 21-circuit right |
| Complementary - Measurement Category | category III |
| Complementary - Noise Level | 0-65 dB |
| Offer Sustainability - China Rohs Regulation | X |
| Offer Sustainability - Rohs Exemption Information | Sí |
| Offer Sustainability - Mercury Free | Sí |
| Offer Sustainability - Eu Rohs Directive | Cumplir |
| Offer Sustainability - Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Offer Sustainability - California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Environment - Ambient Air Temperature For Operation | -20-60 °C |
| Environment - Mounting Mode | clipped || by screws |
| Environment - Ambient Air Temperature For Storage | -40-85 °C |
| Environment - Relative Humidity | 5-90 % |
| Environment - Standards | IEC 62443 |
| Environment - Mounting Support | 35 mm DIN rail || enclosure |
Documentos del producto
When selecting Square D PowerLogic HDPM6000 Multi-Circuit Energy Meter Bundle METSEHDPM6S84WMC, verify the model information, intended use, and installation environment so the part matches the actual job.
Este producto no tiene opiniones.
No hay preguntas sobre este producto.
