La traducción está en preparación. Algunos textos aún se muestran en inglés.
Modelo:
M5304
SKU:
M5304
Disponibilidad:
En stock
$1,094.50
Precio estimado. El precio final y la disponibilidad están sujetos a confirmación. Póngase en contacto con nuestro equipo de ventas para obtener un presupuesto actual.
  0 reviews

The Studio Technologies M5304 is listed as Model 5304 Dante Intercom Station. Its documented dimensions is 8.70 x 4.45 x 1.72" / 22.1 x 11.3 x 4.4 cm. The product data specifies weight as 0.95 lb / 420 g.

For this item, configuration is recorded as Requires Studio Technologies' STcontroller Software Application. Another listed technical detail is power source: Power-over-Ethernet (PoE): Class 2 (Low Power, ≤6.49 Watts) per IEEE; 802.3af. The specifications also include compressor: Threshold: 1.5 dB Above Nominal Level (-18.5 dBFS) Slope: 2:1.

Especificaciones

Dimensiones de la caja (LxWxH)
13 x 6.7 x 5.1"
Compresor
Threshold: 1.5 dB Above Nominal Level (-18.5 dBFS) Slope: 2:1
Configuración
Requires Studio Technologies' STcontroller Software Application
Conectores
Headset: 5-Pin Female XLR Ethernet: RJ45 Jack Remote Control Inputs: 3-Conductor (TRS) 3.5 mm Jack USB-A Receptacle (Used Only for Updating Application Firmware)
Dimensiones
8.70 x 4.45 x 1.72" / 22.1 x 11.3 x 4.4 cm
Medio ambiente
Operating Temperature: 32 to 122° F / 0 to 50° C Storage Temperature: -40 to 158° F / -40 to 70° C Humidity: 5 to 95%, Noncondensing Altitude: Not Characterized
Salida de auriculares
Type: 2-Channel Compatibility: Intended for Connection to Stereo (Dual-Channel) or Monaural (Single-Channel) Headsets with Nominal Impedance of 50 Ohms or More Maximum Output Voltage: 2.9 Vrms, 1 kHz, with 150-Ohm Load Frequency Response: 7 Hz to 9.8 kHz, -3 dB Distortion (THD+N): 100 dB
Entrada de micrófono
Compatibility: Analog Dynamic or Electret Microphones Type: Unbalanced Electret Microphone Power: 3.3 Volts DC via 2-Kilohm Series Resistance, Selectable On/Off Gain: 24, 30, 36, 42, or 48 dB, Selectable Frequency Response: 42 Hz to 18 kHz, -3 dB, Nominal Distortion (THD+N):
Tecnología de audio en red
Type: Dante Audio-over-Ethernet AES67-2018 Support: Yes, Selectable On/Off Dante Domain Manager (DDM) Support: Yes Bit Depth: Up to 24 Sample Rate: 48 kHz Pull-Up/-Down Support: No Dante Transmitter (Output) Channels: 4 Dante Receiver (Input) Channels: 4 Dante Audio Flows: 4; 2 Transmitter, 2 Receiver Transmitter (Output) and Receiver (Input) Nominal Level: -20 dBFS
interfaz de red
Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) Not Supported) Power-over-Ethernet (PoE): Per IEEE 802.3af Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s Not Supported)
Peso del envase
1.35 lb
Fuente de energía
Power-over-Ethernet (PoE): Class 2 (Low Power, ≤6.49 Watts) per IEEE; 802.3af
Receptor
Sources: Dante Receiver (Input) Channels 1 to 4 Signaling Method: 20 kHz ±800 Hz, Nominal, Within Audio Channels Receive Level: -27 dBFS Minimum Detect Time: 10 ms, Minimum
Enviar
Signaling Method: 20 kHz, Within Selected Dante Transmitter (Output) Audio Channels Send Level: -20 dBFS
actualización de software
USB Flash Drive Used for Updating Application Firmware; Dante Updater Application for Updating Dante Interface Firmware
Peso
0.95 lb / 420 g
Canales de audio
Four Talk, Four Listen
Entrada remota
Inputs: 2 Function: Configurable, Can Mimic the Action of Any of the Five Button Functions Type: Active Low, 1 mA Maximum, Inputs Pulled Up to 3.3 Volts DC via 3.4 Kilohm Resistors
Reseñas: 0

Este producto no tiene opiniones.

Preguntas: 0

No hay preguntas sobre este producto.

Productos similares