התרגום נמצא בהכנה. חלק מהטקסטים עדיין מוצגים באנגלית.
Model:
NQ-GA10PV
SKU:
SAFSALE-1494321
Availability:
במלאי
$565.35
מחיר משוער. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
  0 reviews

This module is designed for VoIP paging and intercom applications. It supports a low-impedance (up to 8 Ohms) speaker and is compatible with PoE 802.3af. The device is UL 2043 plenum rated. It can be connected to a network via an Ethernet cable and includes built-in talkback functionality for broadcasting and communication. The module also features an HDMI 1.3 output for simultaneous AV applications. Additional features include push-to-talk microphone support, audio input routing, DSP-based noise rejection, web-based configuration, analog call switch support, CAN bus interface, form-c relay interfaces, and integrated mounting flanges.

  • Power Output: 10 W @ 8 Ohms
  • S/N Ratio: 80 dB
  • THD + N: <.05 thd khz rated power>
  • Rated Load Impedance: 8 Ohms
  • Frequency Response: 20 Hz to 20 kHz +/- 0.25 dB (@ 1 W)

Specifications

Certifications
FCC Part 15b Class A ICES-003, Issue 6: 2016 EN 55032: 2012 EN 55035: 2017 UL 2043 Carries NRTL Safety Mark
DC Input
15 W 48 V to 56 V
I/O Connector
12-Pin Phoenix Plug/Header
Indicators
Power & Status LEDs (Front) / Network LEDs (Front)
Networking
Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
Power Output
10 W @ 8 Ohms
Protection
ESD, RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, and Clip Limiting
Relay Contacts
SPDT Rated 2 A; NC (Normally Closed); Common; NO (Normally Open); G (Ground)
S/N Ratio
80 dB
HDMI Output
HDMI 1.3 (Max. 1920 x 1080 @ 30 Hz)
Push-to-Talk (PTT)
DDU250 or equivalent; 500 Ohm impedance with a 4-conductor cable (2 shielded) PTT dry contact switch on Phoenix Plug Terminals G & A; Mic audio on Phoenix Plug Terminals 1 & 2
THD + N
<.05 thd khz rated power>
Audio Amplifier
Class of Operation: D
CAN Bus Protocol
5 VDC; CH (CAN Hi); CL (CAN Low); G (Ground); Bus Speed 125 kb/s (For connection to Bogen's NQ-E7020 Digital Call Switch)
External DC Source
48 to 56 VDC / .3 A (5.5mm x 2.1mm Barrel Jack)
Rated Load Impedance
8 Ohms

Technical

Dimensions
3.8 x 0.9 x 6.2" / 9.5 x 2.2 x 15.7 cm
Other
Power Output Bandwidth: 20 Hz to 20 kHz > .1% THD+N Call Switch Input: Dry Contact Closure on Phoenix Plug Terminals G & A (Bogen CA-15C or equivalent) Analog Speaker Connection: Phoenix Plug Terminals 1 & 2 Audio Talkback: Half-Duplex using the analog speaker for talkback; Phoenix Plug Terminals 1 & 2 Ambient MIC Input: Ambient Noise Sensor Microphone (ANS500M); Phoenix Plug Terminals 1 & 2
PoE
IEEE 802.3af Class 3 Device (RJ-45)
Weight
0.7 lb / 0.3 kg
Operating Temperature
5 to 104°F / -15 to 40°C
Frequency Response
20 Hz to 20 kHz +/- 0.25 dB (@ 1 W)
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products