La traducción está en preparación. Algunos textos aún se muestran en inglés.
Modelo:
NQ-GA10PV
SKU:
SAFSALE-1494321
Disponibilidad:
En stock
$565.35
Precio estimado. El precio final y la disponibilidad están sujetos a confirmación. Póngase en contacto con nuestro equipo de ventas para obtener un presupuesto actual.
  0 reviews

This module is designed for VoIP paging and intercom applications. It supports a low-impedance (up to 8 Ohms) speaker and is compatible with PoE 802.3af. The device is UL 2043 plenum rated. It can be connected to a network via an Ethernet cable and includes built-in talkback functionality for broadcasting and communication. The module also features an HDMI 1.3 output for simultaneous AV applications. Additional features include push-to-talk microphone support, audio input routing, DSP-based noise rejection, web-based configuration, analog call switch support, CAN bus interface, form-c relay interfaces, and integrated mounting flanges.

  • Power Output: 10 W @ 8 Ohms
  • S/N Ratio: 80 dB
  • THD + N: <.05 thd khz rated power>
  • Impedancia de carga nominal: 8 Ohms
  • Frequency Response: 20 Hz to 20 kHz +/- 0.25 dB (@ 1 W)

Especificaciones

Certificaciones
FCC Part 15b Class A ICES-003, Issue 6: 2016 EN 55032: 2012 EN 55035: 2017 UL 2043 Carries NRTL Safety Mark
DC Input
15 W 48 V to 56 V
Conector I/O
12-Pin Phoenix Plug/Header
Indicadores
Power & Status LEDs (Front) / Network LEDs (Front)
Creación de redes
Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
Salida de energía
10 W @ 8 Ohms
Protección
ESD, RF, DC, baja frecuencia, térmica, baja impedancia, cortocircuito y limitación de clips
Contactos relé
SPDT Calificación 2 A; NC (Normalmente cerrado); Common; NO (Normalmente abierto); G (Ground)
S/N Ratio
80 dB
Salida HDMI
HDMI 1.3 (Max. 1920 x 1080 @ 30 Hz)
Push-to-Talk (PTT)
DDU250 or equivalent; 500 Ohm impedance with a 4-conductor cable (2 shielded) PTT dry contact switch on Phoenix Plug Terminals G & A; Mic audio on Phoenix Plug Terminals 1 & 2
THD + N
<.05 thd khz rated power>
amplificador de audio
Class of Operation: D
CAN Bus Protocolo
5 VDC; CH (CAN Hi); CL (CAN Low); G (Ground); Bus Speed 125 kb/s (For connection to Bogen's NQ-E7020 Digital Call Switch)
Fuente externa de DC
48 to 56 VDC / .3 A (5.5mm x 2.1mm Barrel Jack)
Impedancia de carga nominal
8 Ohms

Técnica

Dimensiones
3.8 x 0.9 x 6.2" / 9.5 x 2.2 x 15.7 cm
Otros
Power Output Bandwidth: 20 Hz to 20 kHz > .1% THD+N Call Switch Input: Dry Contact Closure on Phoenix Plug Terminals G & A (Bogen CA-15C or equivalent) Analog Speaker Connection: Phoenix Plug Terminals 1 & 2 Audio Talkback: Half-Duplex using the analog speaker for talkback; Phoenix Plug Terminals 1 & 2 Ambient MIC Input: Ambient Noise Sensor Microphone (ANS500M); Phoenix Plug Terminals 1 & 2
PoE
Dispositivo IEEE 802.3af Clase 3 (RJ-45)
Peso
0.7 lb / 0.3 kg
Temperatura de funcionamiento
5 to 104°F / -15 to 40°C
Respuesta de frecuencia
20 Hz a 20 kHz +/- 0.25 dB (@ 1 W)
Reseñas: 0

Este producto no tiene opiniones.

Preguntas: 0

No hay preguntas sobre este producto.

Productos similares