3-Phase Delta Buck/Boost Prewired Transformer - 208V Primary - 230V Secondary - 40 Amps - 50/60Hz, (2) 6/4 SOOW Whips

Product Overview

3-Phase Delta Buck/Boost Prewired Transformer - 208V Primary - 230V Secondary - 40 Amps - 50/60Hz, (2) 6/4 SOOW Whips is a product intended for professional commercial and industrial applications.

Key Specifications

• Transformer Features: The MPD-MT-BBT-208D-230D-3P-40A-2X5FT-BCE buck and boost transformer is a three phase unit with a 15.93 kVA rating and a primary voltage of 208 V Delta using a maximum of 44.23 amps on the primary side. This step-up transformer has a secondary voltage of 230 V Delta and provides up to 40 amps available on the secondary side. Featuring robust construction, this unit's cores are manufactured with non-aging, cold-rolled silicon steel laminations using state of the art technology.
• Benefits: The MPD-MT-BBT-208D-230D-3P-40A-2X5FT-BCE buck/boost step-up transformer offers many benefits to the consumer. Buck/boost transformers pass the majority of the load voltage
• Mounting: Integrated wall mounting brackets make installation fast and easy. Because of the smaller overall footprint, heavy machinery is rarely needed for mounting and installation.
• Wiring/Installation: The MPD-MT-BBT-208D-230D-3P-40A-2X5FT-BCE is equipped with 5' 6/4 SOOW whips with blunt cut ends on both the primary and secondary sides. This transformer makes installation simple. Operators connect them to the corresponding current. For example, the 208 V whip gets connected to 208 V current.
• Applications: Air conditioners, lighting systems, heating elements, motor applications and other applications that that require the ability to power loads that differ from the available line voltage.
• Limitations: While there are many benefits to a buck/boost transformer, there are some limitations to consider. This transformer will only transformer voltage, it will not convert phases, it will not create even legs between line 1 and line 2 (L1 and L2 WILL be UNEVEN), has no circuit isolation, and does not create a neutral for applications where a neutral is not already present. If any of these limitations apply to
• Note on Voltage Generation: Buck/boost transformers, like this unit, do NOT generate even legs of voltage on the secondary side. The generate voltage legs will always be unbalanced. This is acceptable for some situations, but other situations call for even legs on the secondary side. This simply cannot be achieved with a buck/boost transformer.

This item is grouped with 65-75 KVA Industrial Transformers.

Before ordering: Verify ratings, dimensions, compatibility, and installation requirements before ordering.