45 KVA Power Distribution Panel - 380V to 240D/120V 3PH - (9) 320R6W - GFCI Breakers

Product Overview

45 KVA Power Distribution Panel - 380V to 240D/120V 3PH - (9) 320R6W - GFCI Breakers is a product intended for professional commercial and industrial applications.

Key Specifications

• Portable Power Distribution Purpose and Use: The MPD-480.3P-45KVA-240D120-9X320R6W portable power distribution system gives operators the ability to power their 240V equipment from a single system. On the primary side, operators connect 380 volt using a customer-provided cord. On the secondary side, operators connect to nine, 320R6W (IEC 60309) receptacles for 240V equipment. All receptacles are protected by weatherproof covers.
• Operation: A customer-provided cord brings three-phase 380V power to the NEMA 3R 100-amp, 380V three phase primary disconnect, which contains three 90-amp time delay fuses, and passes three-phase 380V through to the transformer. The NEMA 3R 45 KVA transformer converts 380V power to three-phase 240D/120V 60Hz and passes the current to the secondary side. The secondary side of the transformer feeds a NEMA 3R 125-amp, 240D/120V three phase main lug only panel. This secondary side contains nine, 20-amp 2-pole 250V GFCI breakers protecting nine, 20-amp 250V 320R6W (IEC 60309) receptacles.
• Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.
• Grounding: Transformer is grounded to the frame and we provide a grounding lug on the frame for the earth ground.
• Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, construction sites, plant maintenance, plant turnarounds, shows, exhibits, and shipyard operations. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments.
• Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or

This item is grouped with Portable Power Distribution Panels.

Before ordering: Verify ratings, dimensions, compatibility, and installation requirements before ordering.