50 Watt LED Light Emitter - 5 Watt Cree LEDs - 9-32 Volts DC - 3700 Lumens - IP67 - Navigation Light

Product Overview

50 Watt LED Light Emitter - 5 Watt Cree LEDs - 9-32 Volts DC - 3700 Lumens - IP67 - Navigation Light is a product intended for professional commercial and industrial applications.

Key Specifications

• LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
• Cree Specific: This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 74 lumens per watt effective lumen output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources.
• Mounting: A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount, allowing the unit to be installed anywhere a 1/2" hole can be drilled.
• Power/Wiring/Plug: The LEDLB-10R-CPR is designed to run multiple voltages ranging from 9 to 32 volts DC and draws 4.16 amps at 12V DC. A 20` 16/2 wiring harness is supplied with the fixture.
• Applications: ATVs and Off Road Vehicles, Police, Fire and Rescue, Military and Security, Excavators, Dozers, Cranes, Boating and Marine Use

This item is grouped with Military Spotlights 24V.

Before ordering: Verify ratings, dimensions, compatibility, and installation requirements before ordering.