56W Hazardous Location Light Fixture, Non-Metallic, 2 LED Lamps, Modbus TCP/IP Network, Aluminum Housing, Dimmable, Corrosion Resistant, Marine Application, C1D2/C2D2

Product Overview

56W Hazardous Location Light Fixture, Non-Metallic, 2 LED Lamps, Modbus TCP/IP Network, Aluminum Housing, Dimmable, Corrosion Resistant, Marine Application, C1D2/C2D2 is a product intended for professional commercial and industrial applications.

Key Specifications

• Network: The network controller is equipped with one optically-isolated digital input and one SPDT relay contact. Compatible with 9-28V DC, the unit features a 3-position removable relay (N, NO, NC), a 5-position removable power/inputs and an 8-pin RJ-45 port for network connections. Operators can mount the device on walls, surfaces or din rails for space-saving benefits.
• Mounting Options: Unless otherwise specified, our standard, most popular configuration is the flange mount shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
• Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 38.25" on center apart along the top of this hazardous location light. The mounting holes are 7.2" on center across the top of the light.
• Standard Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4” NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs and tied in to the fixture's lead wires, completing the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture.
• Suggested Applications: The HALP-ANC-48-2L-LED-D-V2 is designed for Modbus TCP/IP lighting networks, remote lighting networks, marine, wet, damp locations where corrosion resistant fluorescent lights are required or are already present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants, and marine loading docks.

This item is grouped with Hazardous Location Area Lights and Portable Lighting.

Before ordering: Verify ratings, dimensions, compatibility, and installation requirements before ordering.