The Ashly NX1.52 Programmable Output Power Amplifier is designed for professional audio applications. It offers per channel output power of 1,500 W at 2 Ω, 1,500 W at 4 Ω, and 1,250 W at 8 Ω. The amplifier also supports bridge mode with 3,000 W at 4 Ω. It includes 70 V and 100 V output options. Power draw specifications include sleep mode under 1 W, standby mode 40 W, and idle mode 55 W. Current draw varies depending on voltage and operational mode. Thermal dissipation is specified in BTU/hr for different modes. Voltage gain can be set to 26 dB, 32 dB, 38 dB, or 1.4 V. Damping factor exceeds 250 with an 8 Ω load. A high-pass filter at 80 Hz is included. Distortion levels are below 0.5% THD-N and THD. Channel separation is -75 dB at 1 kHz. Signal to noise ratio is over 111 dB from 20 Hz to 20 kHz. Frequency response is +/-0.05 dB across the same range. Input connectors include balanced options.
- Output Power: Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1%THD, Low Z Output, All Channels Driven 2 Ω: 1,500 W 4 Ω: 1,500 W 8 Ω: 1,250 W Low Z output, Bridge Mode, 20 Hz to 20 kHz, 1%THD, All Channels Driven 4 Ω: 3,000 W 70 V, 100 V Output, All Channels Driven 70 V (per channel): 1,500 W 100 V (per channel): 1,250 W
- Power Draw: Sleep Mode: < 1 W Standby Mode: 40 W Idle (no signal): 55 W
- Current Draw: 120 VAC Mains (Divide by 2 for 240 V) Sleep Mode: 0.1 A Standby Mode: 0.70 A Idle (no signal): 1.00 A All Channels Driven (Divide by 2 for 240 VAC) Typical: 8.0 A
- Dissipation: Thermal (All Channels Driven) Sleep Mode: 3.4 BTU/hr Standby Mode: 136 BTU/hr Idle (no signal): 187 BTU/hr Typical (1/8 maximum power): 850 BTU/hr
- Voltage Gain: Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
Specifications
Technical
There are no reviews for this product.
No questions about this product.
