Model:
NXE3.02SKU:
SAFSALE-981134Availability:
In Stock
$3,496.90
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
The Ashly nXe3.02 Network Power Amplifier is a 2-channel base level amplifier rated for 70V and 100V. It features selectable voltage gain at 26 dB, 32 dB, 38 dB, or 1.4 V. The damping factor is >250 (8 Ω load <1 kHz). It includes an input high pass filter at 80 Hz 2nd order. Distortion is <0.5% SMPTE, typical <0.5% THD-N, typical (8 Ω, 10 dB below rated power, 20 Hz to 20 kHz). Channel separation is -75 dB (dB from full output, 1 kHz). Signal / noise ratio is >114 dB (all 3.0x models) 20 Hz to 20 kHz, un-weighted. Frequency response is 20 Hz to 20 kHz, ±0.05 dB. It has a balanced input connector: Euroblock 3.5 mm, 1/4" TRS and XLR combo jack. Input impedance is 10 kΩ. Maximum input level is +21 dBu. Speaker output connector: Neutrik & speakON. Network control is compatible with standard 100 MB Ethernet.
- Voltage Gain: Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
- Damping Factor: >250 (8 Ω load <1 kHz)
- Filter: Input High Pass Filter: 80 Hz 2nd order
- Distortion: <0.5% SMPTE, typical <0.5% THD-N, typical (8 Ω, 10 dB below rated power, 20 Hz to 20 kHz)
- Channel Separation: -75 dB (dB from full output, 1 kHz)
Specifications
Action Type
Gentle, normal, aggressive, user defined
Amplifier
Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Box Dimensions (LxWxH)
19 x 16 x 4"
Contact Closure
Remote Standby: Euroblock 0.138 in (3.5 mm), close contact to GND for standby mode Preset Recall: Euroblock 0.138 in (3.5 mm), close contact to GND for preset 1-4 recall
Cooling
Continuously variable temperature controlled axial fan(s)
Crossover
2 Way, 3 Way, 4 Way Crossover & High Pass / Low Pass Filters Bessel & Butterworth Filters: 12 / 18 / 24 / 48 dB/octave Linkwitz-Riley Filter: 12 / 24 / 48 dB / octave Frequency: Off, 20 Hz to 20 kHz
Current Draw
For 120 VAC Sleep Mode: 0.1 A Standby Mode: 0.70 A Idle (No Signal): 1.00 A For 240 VAC Sleep Mode: 0.2 A Standby Mode: 0.35 A Idle (No Signal): 0.5 A Maximum for all Channels Driven: For 120 VAC Typical: 14.7 A For 240 VAC Typical: 7.3 A
Delay
Sampling Rate: At 48kHz (Input Time, Distance & Temperature) Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms At 96 kHz (Input Time, Distance & Temperature) Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms
dissipation
Thermal Dissipation: Sleep Mode: <3.4 BTU/hr Standby Mode: 136 BTU/hr Idle (no signal): 187 BTU/hr Typical (1 / 8 Max Power): 1,360 BTU/hr Note: All Channels Driven
Distortion
<0.5% SMPTE, typical <0.5% THD-N, typical (8 Ω, 10 dB below rated power, 20 Hz to 20 kHz)
Gain
Gain (with / without VCA): -50 to 12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to -∞ WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
Input Impedance
10 kΩ
LED Indicators
Front Panel LED Indicators: White LED: Power Switch: On, off, standby (flashing) Red LED: Clip / Mute Per Channel: Clip @ 1 dB below full output / mute Protect: On, Off Green LED: Signal Per Channel: -18 dBu Bridge Per Channel Pair: On, off Com: On, for Ethernet data or device ID Current Per Channel: Proportional to output Yellow LED: Temperature Per Channel: On dim at 90% max operating temperature, full bright + protect at 100% Sleep: On, amplifier is asleep from audio inactivity Disable: On, p
Level
Target Level: -40 to 20 dBu
Level Control
Remote DC: Euroblock 0.138 in (3.5 mm) - Gnd, CV, V+ per input
Limiter
Brick Wall Limiter: Threshold: -20 to 20 dBu Ratio: Infinite Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB
Maximum Gain
0 to 22 dB
Maximum Input Level
+21 dBu
Metering
In, out, attenuation, graphical
Network
Control Network: Compatible with standard 100 MB Ethernet
Package Weight
31 lb
Power Draw
Sleep Mode: < 1 W Standby Mode: 40 W Idle (No Signal): 55 W Note: All Channels Driven
Ratio
1.2:1 to infinite
Attack
0.2 to 50 ms
Attenuation
Front panel, software, offset link group, and remote per channel fully off = mute
Audio Metering
Range: -60 to 20 dBu Increments: 1 dB Peak Hold Indicator: Yes
AUX Outputs
Connector: Balanced Euroblock 0.138 in (3.5 mm) Maximum Output: 21 dBu
Channel Separation
-75 dB (dB from full output, 1 kHz)
Damping Factor
>250 (8 Ω load <1 kHz)
Data
Data Connection: Euroblock 0.138 in (3.5 mm) - Gnd, +18 V, In, Out
Detectors
Peak / average
Ducking
Trigger Threshold: -80 to 20 dBu Ducking Release: 5 to 1000 ms/dB Ducking Depth: 0 to -30 dB, -∞ Enable Ducking at Matrix Mixer: Yes Metering: Input
EQ Type
For 31-Band Filter Type: Constant Q or proportional Bandwidth: 0.499 octave to 0.25 octave For Parametric 2,4,6, or 10 Band Frequency: 20 to 20 kHz Level: -30 to 15 dB Q Value: 0.016 to 3.995 octave For Hi / Low Shelf 6 / 12 dB/octave Frequency: 20 Hz to 20 kHz Level: -15 to 15 dB For All Pass Frequency: 20 Hz to 20 kHz For Variable Q HP / LP Frequency: 20 Hz to 20 kHz Q Value: 3.047 to 0.267 For Notch / Bandpass Frequency: 20 Hz to 20 kHz Q Value: 92.436 to 0.267
Filter
Input High Pass Filter: 80 Hz 2nd order
Filters
Number: 12 In/Out per filter: Yes Lock per filter and global lock: Yes Filter Modes: Float, Restricted, Manual Filter Type: Notch, Parametric Filter Frequency Range: 20 Hz to 20 kHz Notch Filter: -∞ Parametric Filter: 15 dB to -30 dB Filter Bandwidth: 0.016 to 3.995 octave Detector Sensitivity: 5 levels Float Time: 5 minutes to 24 hours
Gain Adjustment Range
0.2 to 20 s/dB
Groups
Link Groups: 16 available
Hold
0 to 6 seconds
Input Channels
ANC: 1 to 2 or 1 to 4
Input Source
Protēa DSP Options: Analog, auto (net, AES3, analog) Note: All DSP functions can be linked to 1 of 16 link groups
Mixer
Gain (0.5 dB Increments): Off, -50 to 12dB Mute: Per channel Auto-mixer Enabled: Per channel Global Auto-mixer Response: 0.01 to 2 sec Enable Ducking at Mixer: Yes Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Release
5 to 1000 ms/dB
Signal / Noise
20 Hz to 20 kHz, un-weighted >114 dB (all 3.0x models)
Signal Generator
Pink Noise, White Noise, Sine Wave Signal Level: Off, -50 to 20 dBu Sine Wave Frequency: 20 Hz to12 kHz
Speaker Output
Connector: Neutrik & speakON
Threshold
-20 to 20 dBu
Threshold Range
Noise: -40 to 20 dBu
Voltage Gain
Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
Technical
Dimensions
19.0 x 3.5 x 16.8" (482.6 x 89.0 x 426.7 mm)
Environmental
Non-condensing 32 to 113ºF (0 to 45ºC)
Power
At 50 Hz Nominal (Automatic Sensing SMPS): 120 VAC Operating Range: 70 to 135 VAC Minimum Power-Up: 85 VAC At 60 Hz Nominal (Automatic Sensing SMPS): 240 VAC Operating Range: 140 to 270 VAC Minimum Power-Up: 170 VAC
Range
Off, 100 to 0 dB
Weight
< 28.0 lb (12.7 kg)
Connector
Balanced Input Connector: Euroblock 3.5 mm, 1/4" TRS and XLR combo jack
Control
Advanced Gate Controls: Key Engage Enable: Yes Key Frequency: 20 Hz to 20 kHz Key Bandwidth: 0.016 to 3.995 octave
Output
For Max Output Power Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1% THD & Low Z Output: 2 Ω: 3,000 W 4 Ω: 2,000 W 8 Ω: 1,250 W For Low Z output, Bridge Mode, 20 Hz to 20 kHz & 1% THD: 4 Ω: 6,000 W For Output Per Channel: 70 V: 2,450 W 100 V: 1,250 W Note: All Channels Driven
Frequency Response
20 Hz to 20 kHz, ±0.05 dB
Processor
Input A/D, Output D/A: 24 bit DSP Processors: 32-bit floating point Sample Rates: 48 kHz, 96 kHz Propagation Delay @ 48 kHz: 1.42 ms Propagation Delay @ 96 kHz: 0.71 ms
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products
