Behringer 182 Sequencer Module for Eurorack (16 HP)

The Behringer 182 is a sequencer module designed for Eurorack systems. It features two channels with 8-step sequencing, reproducing the circuitry of the System 100M. The module includes controls for tempo, delay, gate time, and step number. It also has inputs and outputs for CV and trigger signals. The power supply requires 30 mA at +12 V and -12 V. The module occupies 16 HP and measures 5.1 x 3.2 x 1.7 inches. It weighs 0.37 lb and is packaged with a ribbon cable and mounting screws.

• Controls: Step CV Level: 0 to +5 V Tempo: 0.14 to 33 Hz Delay: 0 to 10 Seconds Gate Time: 10 to 90% Duty Cycle Step Number: 1 to 8 Steps Step Switch: Repeat / Manual / Single Start/Stop Switch: Momentary Parallel/Series Switch 8 or 16 Steps
• Signal Connectors: Inputs Tempo CV Input Type: 3.5 mm TS jack, DC Coupled Impedance: 100 Kilohms, Unbalanced Max Input Level: +10 V CV Scaling: 1 V/oct. Trigger Input Type: 3.5 mm TS Jack, DC Coupled Impedance: 30 Kilohms, Unbalanced Max Input Level: +10 V Outputs CV Output Type: 2 x 3.5 mm TS jacks, DC Coupled Impedance 600 Ohms, Unbalanced Max Output Level: +5 V Gate Output Type: 3.5 mm TS Jack, DC Coupled Impedance: 600 Ohms, Unbalanced Max Output Level: +5 V Trigger Output Type: 3.5 mm TS Jack, DC Coupled Impe
• Power: Power Supply: Eurorack Current Draw: 30 mA (+12 V), 30 mA (-12 V)
• Rack Units: 16 HP
• Dimensions: 5.1 x 3.2 x 1.7" / 12.9 x 8.13 x 4.32 cm