Model:
BLU-103SKU:
SAFSALE-1124505Availability:
In Stock
$3,080.00
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
The BSS Audio BLU-103 Conferencing Processor features 8 analog inputs and outputs, 48V phantom power, and supports audio enhancement and voice over IP. It includes 10 electronically balanced mic/line inputs with adjustable gain. The processor has a input impedance of 3.5 kilohms and maximum input level of +20 dBu. It provides a CMRR of greater than 75 dB at 1 kHz and an EIN of less than -125 dBu. The device supports up to 8 channels of AEC processing with specific latency and convergence rate parameters. It also includes features such as two concurrent calls, caller ID, hold capability, redial, and 16-entry speed dial.
- Input: Signal Present, CLIP, 48 V (Input Only), Off Hook (OH)
- Other: Control Link Status and Activity for Ethernet and RS-232 Connections (COM); Device Configuration Status (STAT); Error (ERR); Power/Locate (PWR)
- Mic/Line Inputs: 10 x Electronically Balanced on Euroblock Removable Screw Connectors Nominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps
- Input Impedance: 3.5 Kilohms
- Maximum Input Level: +20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain
Specifications
Connectors
Phoenix/Combicon Connectors for Failsafe Control
Crosstalk
< -75 dB
Dynamic Range
108 dB Typical, 22 Hz to 22 kHz, Unweighted
Input Impedance
3.5 Kilohms
Latency
A/D Latency: 37/Fs [0.77 ms at 48 kHz]
Maximum Input Level
+20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain
Maximum Output Level
+19 dBu
Operating Temperature Range
41 to 95°F / 5 to 35°C
Output Current
Logic Output Current: 10 mA Source, 60 mA Sink
Output Impedance
40 Ohms Balanced, 20 Ohms Unbalanced
Phantom Power
48 V Nominal, Selectable per Input
Power Consumption
< 55 VA
THD
< 0.01% 20 Hz to 20 kHz, +10 dBu Output
CMRR
> 75 dB at 1 kHz
EIN
< -125 dBu Typical with 150-Ohm Source
Mains Voltage
100 to 240 VAC, 50/60 Hz
Mic/Line Inputs
10 x Electronically Balanced on Euroblock Removable Screw Connectors Nominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps
AEC Processing
Up to 8 Channels of AEC Processing AEC Latency: 2385/Fs [49.69 ms at 48 kHz] Tail Length: 200 ms Convergence Rate: 49 dB/s (Average Convergence Rate)
BTU
< 188 BTU/Hour
Control Ports
12 Inputs and 6 Outputs
Maximum Cable Length
300' / 100 m on Cat 5e Cable between Devices
Number of Maximum Nodes
60
Pass-Through
Pass-Thru Latency: 4/Fs 0.08 ms at 48 kHz
Supported Codecs
G.711μ-law, G.711A-law, G.722, G.729AB, DV14 HD, G.726 Fixed Payload, and DV14 Narrowband
Supported Features
Two Concurrent, Independent Calls Caller ID, Hold Capability, Redial, 16-Entry Speed Dial Adjustable Auto-Answer
Technical
Dimensions
19 x 12.5 x 1.8" / 483 x 318 x 45 mm
Impedance
Series Impedance: 220 Ohms (Isolated)
Input Voltage
0 to 4.5 V
Other
Control Link Status and Activity for Ethernet and RS-232 Connections (COM); Device Configuration Status (STAT); Error (ERR); Power/Locate (PWR)
Output Voltage
Logic Output Voltage: 0 or +5 V Unloaded
Outputs
8 x Electronically Balanced on Euroblock Removable Screw Connectors
Voltage
Withstanding Voltage: 80 V Maximum (Off)
Weight
9.1 lb / 4.1 kg
Input
Signal Present, CLIP, 48 V (Input Only), Off Hook (OH)
Frequency Response
20 Hz to 20 kHz (+0.5 dB / -1 dB)
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products
