Model:
CT-DLM870DSKU:
SAFSALE-1303195Availability:
In Stock
$834.90
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
The CableTronix Digital/Analog Signal Level Meter CT-DLM870D is designed to check the integrity of both digital and analog signals. It features a range of technical specifications including frequency coverage from 55.25-865.25 MHz with a resolution of 10 kHz, bandwidth of 280 kHz, and level metering ranging from 25-120 dBuV with an accuracy of ±1.5 dB. The device also includes carrier-to-noise ratio measurement, battery life of approximately 5-8 hours, tilt functionality with 3 channels, voltage measurement input range of 0-100 VAC, and RF spectrum analysis capabilities.
- Frequency: Range: 55.25-865.25 MHz Resolution: 10 kHz Bandwidth: 280 kHz
- Channel Coverage: Analog TV: NTSC Standard Digital TV: QAM, QPSK FM Channel: Single frequency
- Level Metering: Range: 25-120 dBuV Accuracy: ±1.5 dB Resolution: 0.1 dB Input Impedance: 75 Ohm Wave detection: Peak value
- Carrier-to-Noise Ratio: Input range: >70 dBuV Accuracy: ±2 dB Resolution: 0.1 dB
- Battery Life: 5-8 hours (approx.) Charge Time: 5-10 hours
Specifications
Battery Life
5-8 hours (approx.) Charge Time: 5-10 hours
Box Dimensions (LxWxH)
11.7 x 7.5 x 3.55"
Package Weight
2.635 lb
Tilt
Number of Channels: 3 Resolution: 0.1 dB
Carrier to Noise Ratio
Input range: >70 dBuV Accuracy: ±2 dB Resolution: 0.1 dB
Channel Coverage
Analog TV: NTSC Standard Digital TV: QAM, QPSK FM Channel: Single frequency
Level Metering
Range: 25-120 dBuV Accuracy: ±1.5 dB Resolution: 0.1 dB Input Impedance: 75 Ohm Wave detection: Peak value
QAM
Modulation type: 16/32/64/128/256 QAM DVB-C; ITU-TJ.83-AnnexA/AnnexB Symbol Rate: 1.00 Mbps ~7.00 Mbps Bandwidth: 6-10 MHz Frequency tuner: 50 kHz MER measurement range: 19-38 dB ±2 dB BER Pre/post FEC measurement range: 10E-2 to 10E-8 Tuning range: 55.25-865.25 MHz Tuning mode: By channel or by frequency
RF Spectrum Analysis
Bandwidth: Range between 10 MHz, 25 MHz, 50 MHz, and full span
Technical
Channels
Number of Channels: 200 channels max. Scanning speed: 4 channels / sec Zoom: 1X, 2X, 4X three levels of magnification or full Channel Plan scan Memory: 100 Groups, each group Max 200 Channels Number of Learned Channel Plan: 10 max
Dimensions
9.5 x 3 x 4" / 24.1 x 7.6 x 10.2 cm
Frequency
Range: 55.25-865.25 MHz Resolution: 10 kHz Bandwidth: 280 kHz
Voltage
Trunk Voltage Measurement Input Range: 0-100 VAC Accuracy: ±1.5 V
Power Supply
Battery: 7.2 VDC, 1.6 Ah, NiMH battery Charger: 100-240 VAC
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products
