Cloverfield Spec 37.5 KVA Pad Mount Transformer - 13800V Delta Primary, 240/120V Secondary - Biodegradable Fluid /KNAN

Product Overview

Cloverfield Spec 37.5 KVA Pad Mount Transformer - 13800V Delta Primary, 240/120V Secondary - Biodegradable Fluid /KNAN is a product intended for professional commercial and industrial applications.

Key Specifications

• Insulation Fluid: The MT-PML-R72-1P-DMP-37.5KVA-SZ-LT-DF-A6-BB-CZ-1BZ-M1 features biodegradable cooling fluid (KNAN) with a capacity of 40.33 gallons. We offer transformers with mineral oil fluid, if needed.
• Biodegradable Fluid: Biodegradable cooling fluid (vegetable oil) has a higher heat capacity compared to mineral oil, making the liquid safer to use and more reliable during operations. Vegetable oil has a higher flash point and fire point than mineral oil, hydrocarbon oil, silicone oil and synthetic ester. This cooling fluid is also non-toxic and can tolerate higher breakdown voltages than mineral oil. When operating at high temperatures, biodegradable cooling liquid sustains up to 120% loan conditions, which helps preserve the transformer's lifespan and performance.
• Gauges: The following gauges are included with the system: liquid level, temperature, and pressure/vacuum gauges. Standard liquid level, temperature and pressure/vacuum gauges are analog, manual reading types. These gauges do not have auxiliary contacts.
• Fault Pressure Devices: This transformer features an automatic action fault pressure device. Fault pressure devices are used to detect high rates of pressure rise within the tank.
• Rapid Rise Relay: There are no rapid rise relays on the unit. This safety component is designed for protection when a rapid increase in tank pressure occurs. The relay is suitable for detecting sudden pressure fluctuations above predetermined safe limits.
• Surge arresters: This system does not come with high elbow surge arresters on the primary side. Designed for over-voltage and transient voltage protection, the components prevent damage caused by lightning, internal switching or voltage surges. We can offer models without high elbow surge arresters that have mounting provisions for customer-provided surge arresters.
• Load Breaker Switch: The transformer is not equipped with a load break switch. A load break switch can be added upon request. We offer 2-Position and 4-Position load break switches.
• Valves: The MT-PML-R72-1P-DMP-37.5KVA-SZ-LT-DF-A6-BB-CZ-1BZ-M1 is equipped with a fill valve and drain valve with sampler port.
• Protection Fuses: This transformer contains bayonet protection fuses on the primary side. For units without protection fuses, up stream protection is provided. We recommend provisions for protection fuses when possible, as blown fuses may require more frequent oil changes.
• Mount: The heavy-duty enclosure makes the unit suitable for both indoor and outdoor applications. This power distribution system can be pad mounted on concrete pads.

This item is grouped with Single Phase Pad Mount Transformers.

Before ordering: Verify ratings, dimensions, compatibility, and installation requirements before ordering.