The dbx ZonePRO 640m 6x4 Digital Zone Processor is designed for professional audio applications.
The dbx ZonePRO 640m 6x4 Digital Zone Processor is designed for professional audio applications. It features 6 inputs and 4 outputs, allowing for flexible signal routing. The unit includes 4 independent six-segment lightpipe output meters that range from -30 to +20 dBu. An LCD display provides information about source selection, page steering, zone volume, and mute. Inputs include 6 total (4 switchable mic or line, 2 unbalanced, mono-summed RCA input pairs).
The processor offers a common mode rejection ratio of >40 dB, typically >55 dB at 1 kHz. Mic gain range is 30 to 60 dB. The equivalent input noise (EIN) is < -118 dBu, with a 150-ohm source impedance. Phantom power for mic inputs is +15 VDC. Outputs include 4 total, with an output impedance of 120 ohms balanced and 60 ohms unbalanced. The maximum output is +20 dBu. It uses dbx Type IV conversion system, has a sample rate of 48 kHz, and a typical THD+N of 0.003% at +4 dBu, 1 kHz, 0 dB gain.
- Indicators: 4 Independent Six-Segment Lightpipe Output Meters that Range from -30 to +20 dBu, Threshold Meters
- LCD Display: LCD Display Provides Information About Source Selection, Page Steering, Zone Volume, and Mute
- Inputs: Input: 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs Input Connectors: Euroblock (Line and Mic) RCA (Source) Input Type: Electronically Balanced / RF-Filtered Input Impedance: Euroblock: >50 Kilohms Balanced, >25 Kilohms Unbalanced, RF Filtered; RCA: >25 Kilhms Unbalanced, RF Filtered Max Input: +20 dBu Mic/Line, +12 dBu RCA
- CMMR: >40 dB, Typically >55 dB at 1 kHz
- Mic Gain Range: 30 to 60 dB
Specifications
There are no reviews for this product.
No questions about this product.
