Precio estimado. El precio final y la disponibilidad están sujetos a confirmación. Póngase en contacto con nuestro equipo de ventas para obtener un presupuesto actual.
Studio Technologies Model 342 Intercom Station is prepared for professional supply, replacement, integration, or project procurement use. Key factual specifications include Network and AoIP: Type: Dante
Studio Technologies Model 342 Intercom Station is prepared for professional supply, replacement, integration, or project procurement use. Key factual specifications include Network and AoIP: Type: Dante Audio-over-Ethernet AES67-2013 Support: Yes, Selectable On/Off Dante Domain Manager (DDM) Support: Yes Bit Depth: Up to 24 Sample Rate: 48 kHz Pull-Up/Down Support: No Dante Transmitter (Output) Channels: 2 Dante Receiver (Input) Channels: 2 Dante Audio Flows: 4; 2 Transmitter, 2 Receiver; Network Interface: Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GbE) Not Supported) Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s GbE Ethernet Not Supported); Headset Compatibility: Headset A: Single- or Dual-Ear Broadcast-Style with Dynamic or Electret (Low-Voltage DC-Powered) Microphone: Pin 1 Mic Common; Pin 2 Mic; Pin 3 Phones Common; Pin 4 Phones Left; Pin 5 Phones Right Headset B: CTIA/AHJ Configuration (Typically Uses Electret Powered Mic): Tip Phones Left; Ring 1 Phones Right; Ring 2 Common; Sleeve Mic; Audio Channel: 1 Talk, 2 Listen; Microphone Input: Compatibility: Dynamic or Electret (Low-Voltage DC-Powered) Microphones Type: Unbalanced Electret Microphone Power: 3.3 Volts DC via 2 Kilohms Resistor, Selectable On/Off Impedance: 1 Kilohms, Nominal, Microphone Power Off; 690 Ohms, Nominal, Microphone Power On Gain: 24, 30, 36, 42, or 48 dB, Selectable, Ref. -60 dBu Input to Dante Output (-20 dBFS Nominal) Frequency Response: 40 Hz to 20 kHz, -3 dB Distortion (THD+N):
Compatibility, quantity, lead time, shipping, and final project requirements should be confirmed before purchase.
Especificaciones
Audio Channel
1 Talk, 2 Listen
Dimensiones de la caja (LxWxH)
8.9 x 7.9 x 3.9"
Call Functions
Implementation: Monitors Both Dante Receiver (Input) Channels for Presence of Call Signals Signaling Method: 20 kHz, ±800 Hz, within Audio Channels Call Receive Level: -27 dBFS Minimum
Compresor
Application: Applies to Dante Transmitter (Output) Channel and Sidetone Audio Threshold: 1 dB Above Nominal Level (-19 dBFS) Slope: 2:1 Status LED: Lights When Compressor Active
Configuración
Uses Studio Technologies' STcontroller Personal Computer Application
Conectores
Headset A: 5-Pin Female XLR Headset B: 4-Conductor (TRRS) 3.5 mm Jack, per Japanese Standard JEITA/EIAJ RC-5325A Ethernet: Neutrik NE8FBH etherCON RJ45 Jack USB: Type-A Receptacle (Located Inside Model 342's Enclosure and Used Only for Application Firmware Updates)
Dimensiones (W x H x D)
4.3 x 2.1 x 5.1" / 10.9 x 5.3 x 13.0 cm
Medio ambiente
Operating Temperature: 32 to 122°F / 0 to 50°C Storage Temperature: -40 to 158°F / -40 to 70°C Humidity: 5 to 95%, Non-Condensing Altitude: Not Characterized
Salida de auriculares
Type: 2-Channel Compatibility: Intended for Connection to Stereo (Dual-Channel) or Monaural (Single-Channel) Headsets with Nominal Impedance of 50 Ohms or Greater Maximum Output Voltage: 2.8 Vrms, 1 kHz, 150 Ohm Load Frequency Response: 20 Hz to 10 kHz, -3 dB Distortion (THD+N): 100 dB
Headset Compatibility
Headset A: Single- or Dual-Ear Broadcast-Style with Dynamic or Electret (Low-Voltage DC-Powered) Microphone: Pin 1 Mic Common; Pin 2 Mic; Pin 3 Phones Common; Pin 4 Phones Left; Pin 5 Phones Right Headset B: CTIA/AHJ Configuration (Typically Uses Electret Powered Mic): Tip Phones Left; Ring 1 Phones Right; Ring 2 Common; Sleeve Mic
Entrada de micrófono
Compatibility: Dynamic or Electret (Low-Voltage DC-Powered) Microphones Type: Unbalanced Electret Microphone Power: 3.3 Volts DC via 2 Kilohms Resistor, Selectable On/Off Impedance: 1 Kilohms, Nominal, Microphone Power Off; 690 Ohms, Nominal, Microphone Power On Gain: 24, 30, 36, 42, or 48 dB, Selectable, Ref. -60 dBu Input to Dante Output (-20 dBFS Nominal) Frequency Response: 40 Hz to 20 kHz, -3 dB Distortion (THD+N):
interfaz de red
Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GbE) Not Supported) Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s GbE Ethernet Not Supported)
