Horita PTG2 Portable Timecode Generator with 2 Line OLED Display

The Horita PTG2 Portable Timecode Generator features a 2-line OLED display. It includes a 9 V, NEDA/ANSI 1604 A battery. The device has a power toggle switch and LED indicators. The time code format supports SMPTE standards at various frame rates. Input levels for time code range from 0.5 to 10 V p-p. Output level is approximately 2.5 V p-p. GPS input uses RS-232 with NMEA formats. Video input accepts composite NTSC or PAL signals. Operating temperature ranges from 41 to 104°F. The device measures 1 x 2.4 x 4.75 inches and weighs 5 oz including battery.

• Battery: 9 V, NEDA/ANSI 1604 A
• Switches: Power: Momentary ON-OFF-ON toggle switch LED: Red, indicates power ON and flashes when reading or generating timecode LCD: Displays 2 lines of 16 characters each
• Time Code: Format: SMPTE timecode format running at frame rates of 23.976, 24, 25, 29.97DF, 29.97/30 NDF, or 30 fps Input Level: 0.5 to 10 V p-p (-20 dBV to +8 dBu) Impedance: 10 kOhms approximately Output Level: LINE level approximately 2.5 V p-p (-2 dBV/0.22 dBu) square wave, MIC level approximately -35 dBV/-33 dBu (50 mV p-p) square wave, 10K load, approximately -38 dBV/-36 dBu (35 mV P-P) square wave, 1K load Connector: RCA Generator Drift: Not more than +/-1-frame per hour over temperature range
• GPS: Input Level: RS-232 Format: NMEA $GPGGA, $GPRMC, or $GPZDA Baud/Bits: 4800, 8 bits, no parity
• Video: Input Level: RS170A composite NTSC video or equivalent 625/50 PAL video, 0.5 to 2 V p-p