Lynx Technik AG PTG 1802 Testor | lite 3G-SDI Test Pattern Generator

The Lynx Technik AG PTG 1802 Testor | lite 3G-SDI Test Pattern Generator features two multi-format SDI outputs.

The Lynx Technik AG PTG 1802 Testor | lite 3G-SDI Test Pattern Generator features two multi-format SDI outputs. It supports a range of video formats including SDTV and HDTV with various resolutions and frame rates. The device offers multiple 3G modes, including direct mapping, dual link, and multiplexed streams. It includes four independent audio channels with adjustable levels and frequency presets. An analog sync output is provided along with a variety of static test patterns.

The unit also supports text overlay, circle markers, and safe action/title markers. Powered by an internal rechargeable battery, it provides approximately 4 hours of continuous use. The device operates within a temperature range of 41 to 104°F and a humidity level of 90% non-condensing. It meets safety standards including IEC 60950-1.2005 / EN 60950-1:2006. The dimensions are 5.1 x 3 x 0.9" / 13 x 7.7 x 2.3 cm (including connectors).

• SDI Outputs: 2 x SDI on BNC (75 Ohm) Each Output Is the Same Format and Frequency but Can Have Different Static Test Patterns (Dynamic Patterns Are on Both SDI Outputs) SMPTE 424M, SMPTE 292M, SMPTE 259M
• Video Formats: SDTV 270 Mb/s: 525 (480i/59.94), 625 (576i/50) HDTV 1.5 Gb/s: 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/24.98, 1080psf/25, 1080psf/24, 1080psf/23.98, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25, 720p/24, 720p/23.98 HDTV 3Gb/s: 1080p/60, 1080p/59.94, 1080p/50
• 3G Modes: One 3G Stream on Both BNC Connectors Direct Mapping Level A (SMPTE 425) Two Individual 1.5 Gb/s Streams, One per BNC Connector / Dual Link (SMPTE 372) Two Individual 1.5 Gb/s Streams Multiplexed into Single 3 Gb/s Stream / Dual Link Level B (SMPTE 425)
• Audio: 4 x Independent Audio Channels (2 Stereo Pairs), Each with Adjustable Level and Frequency Preset Frequency Selections: 50/100/200/250/400/500/800 Hz, 1/2/4/8/16 kHz Level Adjustments: 0 to -79 dBFS in 1 dB Steps All 4 Channels Available to Both SDI Output Embedders, Which Can Embed 8 Channels into Any Two Groups (Selectable). Each SDI Embedder Can Be Configured Independently with Different Groups and Channel Assignments. Note: When SMPTE 525 Dual Stream or Dual Link Mode Is Used, Audio Is Embedd
• Sync Output: 1 x Analog Sync Output, BNC Connector 75 Ohm Reference Output Is the Same Standard as the Selected SDI Output SDTV = Bi-Level Analog Sync Only (No Burst or Video Content) HDTV = Tri-Level Analog Sync