Spec SheetThe PowerLogic HDPM6000 is a multi-circuit energy meter capable of measuring various electrical parameters across multiple channels. It is equipped with waveform capture and total harmonic distortion analysis, providing detailed power quality insights.
Designed for indoor installation, it supports mounting via clips or screws on a 35 mm DIN rail or enclosure. The device operates within an ambient temperature range of -20 to 60 degrees Celsius and a relative humidity of 5 to 90 percent.
- Network frequency: 50 Hz
- Rated supply voltage: 24 V DC
- Measurement accuracy: +/- 1%
- Measurement voltage: 120-120 V AC, 208-208 V AC, 380-380 V AC, 400-400 V AC, 415-415 V AC, 480-480 V AC at 50 Hz
- Sampling rate: 128 samples per cycle
- Memory capacity: 8 GB
- Communication protocols: TCP/IP, Modbus, SNMP, BACnet
- Poles: 2P + E, 3P + E, 3P + N + E
- Measurement categories include active, reactive, apparent power, power factor, and frequency per channel
- Measurement inputs: external CTs and Rogowski coils
- Measurement accuracy: +/- 1%
- Standards: IEC 62443
- Environmental conditions: -20 to 60°C operation, -40 to 85°C storage, pollution degree 2
Additional features include web-based configuration, real-time data viewing, waveform analysis, and support for multiple communication ports including Ethernet, RS485, and I/O bus.
Technical Specifications
| Network Frequency | 50 Hz |
| Energy Management | asset management || measurement || cost management |
| [Us] Rated Supply Voltage | 24 V DC |
| Power Quality Analysis | waveform capture || total harmonic distortion |
| Variant | equipped |
| Type Of Measurement | current per channel || current all channels || active energy per channel || active energy all channels || active power per channel || active power all channels || apparent power per channel || apparent power all channels || reactive power per channel || reactive power all channels || frequency || power factor per channel || power factor average |
| Product Or Component Type | multi-circuit energy meter |
| Product Name | PowerLogic HDPM6000 |
| Device Short Name | HDPM6000 |
| Range | PowerLogic |
| Complementary - Communication Port Support | 2 RJ45 Ethernet || RS485 screw block terminal || I/O bus RJ45 |
| Complementary - Measurement Accuracy | +/- 1 % |
| Complementary - Measurement Voltage | 120-120 V AC 50 Hz || 208-208 V AC 50 Hz || 380-380 V AC 50 Hz || 400-400 V AC 50 Hz || 415-415 V AC 50 Hz || 480-480 V AC 50 Hz |
| Complementary - Sampling Rate | 128 samples/cycle |
| Complementary - Memory Capacity | 8 GB |
| Complementary - Communication Port Protocol | TCP/IP || Modbus || SNMP || BACnet |
| Complementary - Poles Description | 2P + E || 3P + E || 3P + N + E |
| Complementary - Analogue Input Type | external CT || Rogowski coil |
| Complementary - Web Services | web page || controller configuration || viewing of captured waveform || real time viewing of data |
| Complementary - Communication Of Data | power quality || reading of measurements || percentage of load |
| Complementary - Provided Equipment | strip module 3 21-circuit left || strip module 3 21-circuit right |
| Complementary - Measurement Category | category III |
| Complementary - Noise Level | 0-65 dB |
| Offer Sustainability - China Rohs Regulation | X |
| Offer Sustainability - Rohs Exemption Information | Yes |
| Offer Sustainability - Mercury Free | Yes |
| Offer Sustainability - Eu Rohs Directive | Compliant |
| Offer Sustainability - Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Offer Sustainability - California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Environment - Ambient Air Temperature For Operation | -20-60 °C |
| Environment - Mounting Mode | clipped || by screws |
| Environment - Ambient Air Temperature For Storage | -40-85 °C |
| Environment - Relative Humidity | 5-90 % |
| Environment - Standards | IEC 62443 |
| Environment - Mounting Support | 35 mm DIN rail || enclosure |
Product Documents
Use PowerLogic HDPM6000 Multi-Circuit Energy Meter Bundle METSEHDPMS126WMD together with manufacturer documentation, field measurements, and system requirements before making the final purchase decision.
There are no reviews for this product.
No questions about this product.
