Kidde Commercial reference configuration for sleeping / residential-style commercial using live panel, detection, manual and notification products.
Sleeping / residential-style commercial · Kidde Commercial
Kidde Commercial reference configuration for sleeping / residential-style commercial using live panel, detection, manual and notification products.
The BOM is tied to live Safsale product cards and is intended as a procurement starting point. Product families and quantities must be checked against current manufacturer documentation before use on a real life-safety project.
Calculate nominal Ah from project-entered standby and alarm currents/times with reserve factor.
Open toolAdd notification appliance alarm currents and calculate required circuit/booster capacity with headroom.
Open toolEstimate end-of-line voltage from source voltage, circuit current, cable gauge and one-way distance.
Open toolCount detectors, pulls, modules, duct devices and spare points to select a practical panel/loop class.
Open toolReview AHJ, occupancy, devices, notification, standby, monitoring, pathways and commissioning.
Open toolInclusion here does not by itself establish listed system compatibility.
The reference BOM shows a panel platform, initiating devices, manual stations, notification appliances, battery allowance and fire-alarm cabling from the live Safsale catalog. It is a planning and purchasing concept, not an engineered submittal.
No. Final design requires project-specific engineering and review of applicable adopted codes, occupancy, detector spacing, notification coverage/candela, circuit class, supervision, monitoring, pathway requirements, sequence of operations, product listings and authority-having-jurisdiction requirements.
Use actual standby and alarm current from the selected panel and devices, enter the project-required standby and alarm durations, and apply the manufacturer or project-required reserve/aging factor. The Fire Alarm Battery Calculator on this page is a planning tool.
Add the alarm-current draw of every appliance on the circuit, keep within the panel or booster rating, check synchronization/listing requirements, and separately verify voltage drop at the end of the circuit.
Only after verifying listed compatibility and the current manufacturer documentation for the selected panel, loop, base, module or notification architecture. The catalog pages do not imply cross-manufacturer compatibility.
Safsale can quote equipment after the project team confirms the approved design basis, compatibility and quantities.