The Radial Engineering SW8-USB Auto-Switcher and USB Playback Interface is designed for live music with playback tracking.
The Radial Engineering SW8-USB Auto-Switcher and USB Playback Interface is designed for live music with playback tracking. This device features a transformer Eclipse ET-DB2, a frequency response of 20 Hz to 20 kHz (+0.0 dB /-0.5 dB), and a dynamic range of 120 dB for both XLR outputs and monitor output. The total harmonic distortion (THD) is 0.006% at 1 kHz, +18 dBu for XLR line-level outputs, and 0.009% at 1 kHz, +18 dBu for XLR mic-level outputs.
Intermodulation distortion is 0.0002% at +18 dBu for XLR outputs and monitor outputs. The output impedance is 150 Ohms for both XLR and monitor outputs. Common mode rejection ratio is -98 dB for XLR line level outputs, -90 dB for XLR mic level outputs, and -98 dB for monitor outputs. Noise levels are -120 dB for XLR outputs and monitor outputs. The device supports sample rates of 44.1, 48, 88.2, 96, 176.4, and 192 kHz.
Maximum output is +18 dBu at 0 dBFS for both XLR and monitor outputs. Connections include 2 x USB 2.0, Type-B ports, 1 x coaxial S/PDIF / MTC input, 1 x 1/4" TRS footswitch input, 1 x 5-pin DIN MIDI input, 1 x 5-pin DIN MIDI output, 8 x XLR outputs, 1 x XLR remote output, 2 x 1/4" TS outputs, 8 x 1/4" line-level outputs, and 1 x DB25 output (eight outputs). Power is supplied via 100 to 240 VAC, locking 4-pin XLR.
- Transformer: Eclipse ET-DB2
- Frequency Response: 20 Hz to 20 kHz (+0.0 dB /-0.5 dB)
- Dynamic Range: XLR Outputs: 120 dB Monitor Output: 120 dB
- Total Harmonic Distortion (THD): XLR Line-Level Outputs: 0.006% at 1 kHz, +18 dBu XLR Mic-Level Outputs: 0.009% at 1 kHz, +18 dBu Monitor Outputs: 0.006% at +18 dBu
- Intermodulation Distortion: XLR Outputs: 0.0002% at +18 dBu Monitor Outputs: 0.0002% at +18 dBu
Specifications
There are no reviews for this product.
No questions about this product.
