The RTW TMR7OEM TouchMonitor is a 7-inch audio analyzer designed for OEM use. It features an XLR audio interface for display input and supports two-channel peak metering for stereo channel pairs.
The RTW TMR7OEM TouchMonitor is a 7-inch audio analyzer designed for OEM use. It features an XLR audio interface for display input and supports two-channel peak metering for stereo channel pairs. The device displays peak levels, peak hold indicators, and numerical values. It offers functions including gain adjustment, peak hold on/off, memory recall, and reset. With a 24-bit word width, it provides multiple scale options including TP60, Dig60, DIN5, Nordic, BR IIa, and BR IIb.
The headroom and operation range are adjustable from 0 to -20 dB in 1 dB steps. Integration time can be set to standard or 20 ms, 10 ms, 1 ms, or 0.1 ms. Gain settings include +20 dB and +40 dB. A high-pass filter is available in off, 5 Hz, 10 Hz, and 20 Hz modes. The peak hold indicator can be set to 1, 2, 4, 10, 20, 30 seconds or manual reset.
Input Source: Display via XLR audio interface (AES3)
Peak Meter: 2-Channel: For the defined Stereo channel pair L/R
Display: Peak level Peak hold Numerical value of the display
Function: Gain Peak hold on/off Memory Reset
Word Width: 24 Bit
Specifications
AES3 Status Monitor Display
Channel data are displayed as plain text, hex or binary Channel selectable Audio bit activity Hardware status
Connectors
1 x 15-pin Sub-D female; VGA output 1 x 4-pin locking low voltage connector type Binder 710 (DC) 2 x USB tpe A 2.0 1 x GPIO RJ-11 1 x LAN RJ-45 2 x 25-pin Sub-D female (2 x AES3 input) 2 x 25-pin Sub-D female (2 x AES3 output)
Current Drain
1 A nominal, 2.5 A power-up current (10 μsec)
Dimensions
7.4 x 4.3 x 1.8" (188 x 109 x 45 mm)
Display
Peak level Peak hold Numerical value of the display
Function
Gain Peak hold on/off Memory Reset
Gain
+20 dB, +40 dB (according to standard)
Impedance
> 10 kΩ, electronically balanced
Integration Time
According to standard or 20 ms, 10 ms, 1 ms, 0.1 ms
Operating Temperature
+41 to +104°F (+5 to +40°C)
Operation Range
Adjustable in the range from 0 to -20 dB in steps of 1 dB
Over Indicator Hold Time
1 sec or manual
Over Indicator PPM
Threshold: Full scale, full scale -1LSB, full scale -2LSB, -0.1 dBFS, -0.5 dBFS, -1 dBFS, -2 dBFS, -3 dBFS Attack Time: 1 to 15 samples Word Width: 16 to 24 bit, selectable
Over Indicator True Peak
Threshold: Adjustable
Peak Hold Indicator
1 , 2 , 4 , 10 , 20 , 30 sec, Manual reset or off
Peak Meter
2-Channel: For the defined Stereo channel pair L/R
Power Requirements
+24 VDC
Scales
TP60: +3 to -60 dB Dig60: 0 to -60 dB DIN5: +5 to -50 dB Nordic: +12 to -42 dB BR IIa: 7 to 1, BRIIa ext: 7 to 1 BR IIb: +12 to -12 dB, BR IIb +12 to -12 dB
Weight
3.9 lb (1.8 kg)
Gain Reduction
Display: 1 Bargraph for stereo and surround formats, up to 8 bargraphs in multi-channel mode Input: Data stream via TCP/IP and LAN (ethernet) interface Input Routing: External featured streams selectable Marker: Adjustable threshold for the definition of upper and lower display section Colors: 32 Colors for each bargraph section
Headroom
Adjustable in the range from 0 to -20 dB in steps of 1 dB
High Pass Filter
Off, 5 Hz, 10 Hz, 20 Hz
Input Source
Display via XLR audio interface (AES3)
Sampling Rates
Digital Input: 44.1, 48, 96 kHz Digital Output: Referenced to digital inputs or internal clock
