The Sennheiser TeamConnect SL Ceiling 2 Microphone Array is designed for fixed conference installations.
The Sennheiser TeamConnect SL Ceiling 2 Microphone Array is designed for fixed conference installations. It includes 28 Sennheiser KE 10-237 Mic Cap. The microphone array features a 3-pin terminal for audio output and two digital Dante network audio connections. An Ethernet port enables PoE power supply and data/control communication. The device operates on a voltage range of 44 to 57 VDC PoE IEEE 802.3af Class 3, with a maximum power consumption of 8.8 W.
It meets the plenum rating standards set by UL 2043. The transducer principle is a pre-polarized condenser microphone, with an AF frequency response from 160 Hz to 18 kHz. The sensitivity is 0 dBV/Pa (988 mV/Pa), and the signal-to-noise ratio is 83 dB (A). The latency is 4 ms, and the equivalent noise level is 11 dB (A).
- Audio Output: 1 x 3-Pin Terminal (Fits Phoenix Contact MCVW 1.5-3-ST-3.81) 2 x Digital Dante Network Audio (RJ-45 Primary and Secondary)
- Ethernet Control: 1 x RJ-45 Ethernet Port for PoE Power Supply and Data/Control Communication
- Supply Voltage: 44 to 57 VDC PoE IEEE 802.3af Class 3
- Power Consumption: Maximum 8.8 W
- Plenum Rating: Tested According to UL 2043
Specifications
There are no reviews for this product.
No questions about this product.
