Spec Sheet
$35,739.94
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
Product Overview
Solar Pyramid Docking Station on Trailer - 5' to 13.5' Mast - (2) 265W Solar Panels - Ramp is a product intended for professional commercial and industrial applications.
Key Specifications
- Mast: The mast component, which is externally positioned behind the pyramid, is constructed of high strength, heat treated aluminum tubing for durability. This unit can reach heights between 5` and 13.5`. The tower is comprised of four sections and includes a locking top mounting plate. Internal wiring within the pneumatic mast aids in cable management, as well as reducing tampering and vandalism. The mast is elevated using an air compressor, sold separately. An air release valve located at the base of this pneumatic mast allows operators to lower the tower.
- Batteries: The SPG366A-13.5-RDS features two 200aH 12V deep cycle acid glass mat rechargeable batteries connected in series for a 24V battery bank maintaining 200aH. Of the 200aH, 100aH are useable while maintaining 50% capacity. It is recommended to not allow the battery bank to deplete below 50% capacity, doing so will reduce longevity of the batteries and reduce consecutive charge cycles.
- Applications: Autonomous robot charging, storage and transportation.
This item is grouped with Light Towers.
Before ordering: Verify ratings, dimensions, compatibility, and installation requirements before ordering.
Specifications
Applications
Autonomous robot charging, storage and transportation.
Batteries
The SPG366A-13.5-RDS features two 200aH 12V deep cycle acid glass mat rechargeable batteries connected in series for a 24V battery bank maintaining 200aH. Of the 200aH, 100aH are useable while maintaining 50% capacity. It is recommended to not allow the battery bank to deplete below 50% capacity, doing so will reduce longevity of the batteries and reduce consecutive charge cycles.
Mast
The mast component, which is externally positioned behind the pyramid, is constructed of high strength, heat treated aluminum tubing for durability. This unit can reach heights between 5` and 13.5`. The tower is comprised of four sections and includes a locking top mounting plate. Internal wiring within the pneumatic mast aids in cable management, as well as reducing tampering and vandalism. The mast is elevated using an air compressor, sold separately. An air release valve located at the base of this pneumatic mast allows operators to lower the tower.
Reviews: 0
There are no reviews for this product.
Questions: 0
No questions about this product.
Similar products
