Model:
724900X2
SKU:
724900X2
Availability:
In Stock
Documents:
Spec Sheet
$65,998.90
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
  0 reviews

The Solid State Logic ORIGIN 32-Channel Analog Console is designed for hybrid production environments.

The Solid State Logic ORIGIN 32-Channel Analog Console is designed for hybrid production environments. It features a range of technical specifications including variable gain settings from +5 to +70 dB for microphone amplification and -10 to +55 dB for line amplification. The input impedance is set at 1.4 kilohms, with a maximum microphone input level of +21 dBu (1% THD). The console offers headroom exceeding +26.5 dBu at the onset of clipping.

Its frequency response spans from 20 Hz to 20 kHz with a tolerance of +0/-0.2 dB and a high roll-off over 90 kHz. The total harmonic distortion plus noise is less than 0.004% at 1 kHz and less than 0.018% at 10 kHz. The common-mode rejection ratio exceeds 57.5 dB within the 20 Hz to 20 kHz range. The equivalent input noise (EIN) is below -127.5 dBu under specific conditions. Additional specifications include a gain range of -20 dB to +20 dB and a line max input level exceeding +28 dBu before clipping.

  • Gain: Mic Amp Gain Variable from +5 to +70 dB (Depending on Potentiometer Tolerances) Line Amp Gain Variable from -10 to +55 dB (Depending on Potentiometer Tolerances)
  • Input Impedance: 1.4 Kilohms
  • Microphone Max Input Level: +21 dBu (1% THD)
  • Headroom: Output: >+26.5 dBu at Onset of clipping
  • Frequency Response: 20 Hz to 20 kHz (+0/-0.2 dB, -3 dB High Rolloff Over 90 kHz)

Specifications

Audio Test Conditions
Signal Applied Line Input Mono, Routed by Shortest Path, All Controls Flat or Unity, Pans Set Full Left/Right
Channel Fader Kill
Maximum Fader Attenuation: < -89 dB (20 Hz to 20 kHz)
Dimensions
38.7 x 73.6 x 42.5" / 98.4 x 186.9 x 107.9 cm (Overall, Including Optional Legs)
Frequency Response
20 Hz to 20 kHz (+0/-0.2 dB, -3 dB High Rolloff Over 90 kHz)
Gain
Mic Amp Gain Variable from +5 to +70 dB (Depending on Potentiometer Tolerances) Line Amp Gain Variable from -10 to +55 dB (Depending on Potentiometer Tolerances)
Input Impedance
1.4 Kilohms
Main Mix
Routing Channel to Main Mix < -94 dB (20 Hz to 20 kHz)
Mic Input
<-95 dB (-50 dBu Applied to Mic Input at Maximum Gain, Measured at Direct Output, Monitor Path Selected)
Microphone Max Input Level
+21 dBu (1% THD)
Noise
< -80 dBu
Operating Temperature
34 to 86 °F / 1 to 30 °C
Pan
Pan Pot Isolation: <-55 dB (20 Hz to 20 kHz)
Potentiometer
Pot Centre Detent Accuracy: ±1 dB, Typically < 0.5 dB
Power Consumption
Operating: Typically < 900 W, 1200 W Max Standby/Sleep: Typically < 40 W
Routing Channel to Track Busses
Channel Routed to All Busses Apart from One Under Test: <-64 dB (20 Hz to 20 kHz) Channel Not Routed: <-113 dB (20 Hz to 20 kHz)
Storage Temperature
4 to 122 °F / -20 to 50 °C
THD + Noise
< 0.004% at 1 kHz (20 Hz to 20 kHz; -10 dBu Applied, +30 dB Gain at 1 kHz) < 0.018% at 10 kHz (20 Hz to 40 kHz; -10 dBu Applied, +30 dB Gain at 10 kHz)
Weight
330.0 lb / 150.0 kg (Including Optional Legs)
CMRR
> 57.5 dB 20 Hz to 20 kHz (-10 dBu applied, +30 dB Gain)
EIN
< -127.5 dBu (A-Weighted, Mic Amp 150-Ohm Termination, Maximum Gain)
Headroom
Output: >+26.5 dBu at Onset of clipping
Muting
Channel Muting: < -100 dB (20 Hz to 20 kHz)
THD + N
< 0.0008% at 1 kHz (Filter 20 Hz to 20 kHz, +20 dB Gain at 1 kHz) < <0.0008% at 10 kHz (Filter 20 Hz to 40 kHz; +20 dB Gain at 10 kHz)
Line Max Input Level
> +28 dBu Before Clipping (1% THD)
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products