Spec SheetThe Square D PowerLogic HDPM6000 is a multi-circuit energy meter designed for detailed power measurement and analysis. It features waveform capture, total harmonic distortion measurement, and a measurement accuracy of +/- 1%.
Equipped with 8 GB of memory and a sampling rate of 128 samples per cycle, it supports comprehensive data collection and real-time monitoring. The device supports multiple communication protocols including TCP/IP, Modbus, SNMP, and BACnet, and offers web-based configuration and data viewing.
This energy meter is suitable for indoor environments, mounting on 35 mm DIN rails or enclosures, and supports various pole configurations including 2P + E, 3P + E, and 3P + N + E. It operates within a voltage range of 120-480 V AC at 60 Hz and is powered by 24 V DC.
Technical Specifications
| Network Frequency | 60 Hz |
| Energy Management | asset management || measurement || cost management |
| [Us] Rated Supply Voltage | 24 V DC |
| Power Quality Analysis | waveform capture || total harmonic distortion |
| Variant | equipped |
| Type Of Measurement | current per channel || current all channels || active energy per channel || active energy all channels || active power per channel || active power all channels || apparent power per channel || apparent power all channels || reactive power per channel || reactive power all channels || frequency || power factor per channel || power factor average |
| Product Or Component Type | multi-circuit energy meter |
| Product Name | PowerLogic HDPM6000 |
| Device Short Name | HDPM6000 |
| Range | PowerLogic |
| Complementary - Communication Port Support | 2 RJ45 Ethernet || RS485 screw block terminal || I/O bus RJ45 |
| Complementary - Measurement Accuracy | +/- 1 % |
| Complementary - Measurement Voltage | 120-120 V AC 60 Hz || 208-208 V AC 60 Hz || 380-380 V AC 60 Hz || 400-400 V AC 60 Hz || 415-415 V AC 60 Hz || 480-480 V AC 60 Hz |
| Complementary - Sampling Rate | 128 samples/cycle |
| Complementary - Memory Capacity | 8 GB |
| Complementary - Communication Port Protocol | TCP/IP || Modbus || SNMP || BACnet |
| Complementary - Poles Description | 2P + E || 3P + E || 3P + N + E |
| Complementary - Analogue Input Type | external CT || Rogowski coil |
| Complementary - Web Services | web page || controller configuration || viewing of captured waveform || real time viewing of data |
| Complementary - Communication Of Data | power quality || reading of measurements || percentage of load |
| Complementary - Provided Equipment | retrofit module 2 84-circuit || retrofit module 1 24-circuit |
| Complementary - Measurement Category | category III |
| Complementary - Noise Level | 0-65 dB |
| Offer Sustainability - China Rohs Regulation | X |
| Offer Sustainability - Rohs Exemption Information | Yes |
| Offer Sustainability - Mercury Free | Yes |
| Offer Sustainability - Eu Rohs Directive | Compliant |
| Offer Sustainability - Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| Offer Sustainability - California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Environment - Ambient Air Temperature For Operation | -20-60 °C |
| Environment - Mounting Mode | clipped || by screws |
| Environment - Ambient Air Temperature For Storage | -40-85 °C |
| Environment - Relative Humidity | 5-90 % |
| Environment - Standards | IEC 62443 |
| Environment - Mounting Support | 35 mm DIN rail || enclosure |
Product Documents
When selecting Square D PowerLogic HDPM6000 Multi-Circuit Energy Meter Bundle METSEHDPM6192WMC, verify the model information, intended use, and installation environment so the part matches the actual job.
There are no reviews for this product.
No questions about this product.
