Model:
M354A
SKU:
M354A
Availability:
In Stock
$929.50
Estimated price. Final price and availability are subject to confirmation. Contact our sales team for a current quote.
  0 reviews

The Studio Technologies M354A is listed as Model 354A Talk Station. Its documented dimensions is WxHxD: 3.6 x 2.7 x 4.7" / 9.1 x 6.9 x 11.9 cm. The product data specifies weight as 1.1 lb / 500 g.

For this item, network interface is recorded as Type: 100Base -TX, Twisted-Pair Ethernet with Power-over-Ethernet (PoE) Supported Data Rate: 100 Mb/s. Another listed technical detail is application / usage: Dante-Based Voice Paging, Intercom, Talent Cue (Broadcast IFB), General Audio Installations.

Specifications

Additional Features
Talent Cue (Broadcast IFB) Capability: Number of Channels: Up to 4, Configurable Audio Sources: Dante Receiver (Input) Channels 1-4 Frequency Response: 20 Hz to 20 kHz, +0/-0.7 dB Program Audio Attenuation (Dim): 0, 5, 10, 15, 20 dB, Full Mute, Configurable Dante Monitor Output: Nominal Level: -24 dBFS Analog Monitor Output: Type: Electronically Balanced, Capacitor Coupled, Intended to Drive Balanced or Unbalanced Loads of 2 Kilohms or Greater Audio Source: Dante Receiver (Input) Channels 1-4, P
Application / Usage
Dante-Based Voice Paging, Intercom, Talent Cue (Broadcast IFB), General Audio Installations
Audio
Internal Digital Audio Processing: 32-Bit, Fixed Nominal Digital Input and Output Level: -20 dBFS Preamble Audio: Number of Channels: 2, Field-Updatable Using USB Flash Drive Source Type: 16-Bit Monophonic, 48 kHz Sample Rate, WAV files, Stored in Non-Volatile Memory Level: -20 dBFS Nominal, Adjustable ±12 dB in 3-dB Steps Duration: Up to 40 Seconds per WAV File Distortion: <0.0001% Frequency Response: 20 Hz to 20 kHz, +0/-0.7 dB
Box Dimensions (LxWxH)
8.6 x 7.7 x 4"
Compressor
Threshold: 2.7 dB Above Nominal Dante Output Level (-17.3 dBFS), ±0.3 dB Slope: 2:1 Status LED: Compressor Active
Connectors
Gooseneck Microphone: 3-Conductor 1/4" Jack with 7/16-20 UNF Threaded Bushing Analog Monitor Output: 3-Pin Male XLR Ethernet: Neutrik NE8FBH etherCON RJ45 Jack USB-A Port for Firmware and WAV Audio Files
Dimensions
WxHxD: 3.6 x 2.7 x 4.7" / 9.1 x 6.9 x 11.9 cm
Environmental
Operating Temperature: 32 to 122°F / 0 to 50°C Storage Temperature: -40 to 158°F / -40 to 70°C Humidity: 0 to 95%, Non-Condensing
Microphone Input
Microphone Power: 3.3 VDC via 2.49 K Resistor Impedance: 2 Kilohms, Nominal Gain: 12, 18, 24, 30, 36 dB, Selectable Frequency Response: -3 dB at 40 Hz, -1 dB at 16 kHz Distortion (THD+N): 0.022%, Measured at -20 dBFS, 22 Hz to 22 kHz Bandwidth, 12 dB of Gain Noise Floor: -95 dBFS, A-Weighted, 12 dB of Gain Dynamic Range: >76 dB, A-Weighted, Measured at 36 dB of Gain
Network Interface
Type: 100Base -TX, Twisted-Pair Ethernet with Power-over-Ethernet (PoE) Supported Data Rate: 100 Mb/s
Package Weight
1.515 lb
Weight
1.1 lb / 500 g
Network Audio
Type: Dante Audio-over-Ethernet AES67-2018 Support: Yes Dante Domain Manager (DDM) Support: Yes Bit Depth: 16, 24, or 32 Sample Rate: 48 kHz Number of Transmitter (Output) Channels: 4 Number of Receiver (Input) Channels: 4 Dante Audio Flows: 4 (2 Transmitter, 2 Receiver)
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products