The Studio Technologies Model 370A Intercom Beltpack is a 2-channel wired intercom system that utilizes Dante Audio-over-Ethernet technology.
The Studio Technologies Model 370A Intercom Beltpack is a 2-channel wired intercom system that utilizes Dante Audio-over-Ethernet technology. This device supports AES67-2013 and includes Dante Domain Manager (DDM) support. It features up to 24-bit depth and 48 kHz sample rate with 2 transmitter and 2 receiver channels. The unit is equipped with a 100BASE-TX, twisted-pair Ethernet interface that supports Power-over-Ethernet (PoE).
It includes compatibility for dynamic or electret microphones, with an unbalanced electret microphone powered by 3.3 VDC through a 2.00 k resistor. The device also has a compressor with threshold set at 1 dB above nominal level and slope of 2:1. The headphone output is 2-channel compatible with stereo or monaural headsets, providing a maximum output voltage of 3.8 Vrms at 1 kHz. It includes call functions for signaling within audio channels, with specific send and receive levels.
The unit comes with connectors for headset, Ethernet, and USB, and requires the Studio Technologies STcontroller software for configuration. Environmental specifications include operating temperatures from 32 to 122° F and humidity levels between 5 to 95%, non-condensing.
- Network Audio Technology: Type: Dante Audio-over-Ethernet AES67-2013 Support: Yes Dante Domain Manager (DDM) Support: Yes Bit Depth: Up to 24 Sample Rate: 48 kHz Number of Transmitter (Output) Channels: 2 Number of Receiver (Input) Channels: 2 Dante Audio Flows: 4; 2 transmitter, 2 receiver
- Network Interface: Type: 100BASE-TX, Twisted-Pair Ethernet, Power-over-Ethernet (PoE) Supported Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s Ethernet Not Supported)
- Audio Channels: 2 Talk, 2 Listen
- Microphone Input: Compatibility: Dynamic or Electret (Low-Voltage DC-Powered) Microphones Type: Unbalanced Electret Microphone Power: 3.3 VDC via 2.00 k Resistor, Selectable On/Off Gain: 22, 30, 42, or 48 dB, Selectable, ref. -60 dBu Input to Dante Output (-20 dBFS Nominal) Frequency Response: 50 Hz to 10 kHz, -3 dB Distortion (THD+N): <0.02% Noise Floor: -95 dBFS (A-Weighted)
- Compressor: Threshold: 1 dB Above Nominal Level (-19 dBFS) Slope: 2:1 Status LED: Compressor Active
Specifications
There are no reviews for this product.
No questions about this product.
