Studio Technologies Model 5304 Dante Intercom Station is prepared for professional supply, replacement, integration, or project procurement use. Key factual specifications include Power Source: Power-over-Ethernet
Studio Technologies Model 5304 Dante Intercom Station is prepared for professional supply, replacement, integration, or project procurement use. Key factual specifications include Power Source: Power-over-Ethernet (PoE): Class 2 (Low Power, ≤6.49 Watts) per IEEE; 802.3af; Network Audio Technology: Type: Dante Audio-over-Ethernet AES67-2018 Support: Yes, Selectable On/Off Dante Domain Manager (DDM) Support: Yes Bit Depth: Up to 24 Sample Rate: 48 kHz Pull-Up/-Down Support: No Dante Transmitter (Output) Channels: 4 Dante Receiver (Input) Channels: 4 Dante Audio Flows: 4; 2 Transmitter, 2 Receiver Transmitter (Output) and Receiver (Input) Nominal Level: -20 dBFS; Audio Channels: Four Talk, Four Listen; Network Interface: Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) Not Supported) Power-over-Ethernet (PoE): Per IEEE 802.3af Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s Not Supported); Microphone Input: Compatibility: Analog Dynamic or Electret Microphones Type: Unbalanced Electret Microphone Power: 3.3 Volts DC via 2-Kilohm Series Resistance, Selectable On/Off Gain: 24, 30, 36, 42, or 48 dB, Selectable Frequency Response: 42 Hz to 18 kHz, -3 dB, Nominal Distortion (THD+N): <0.03%, 1 kHz, 24 dB Gain Noise Floor: -94 dBFS (A-Weighted).
Compatibility, quantity, lead time, shipping, and final project requirements should be confirmed before purchase.
Specifications
Box Dimensions (LxWxH)
13 x 6.7 x 5.1"
Compressor
Threshold: 1.5 dB Above Nominal Level (-18.5 dBFS) Slope: 2:1
Configuration
Requires Studio Technologies' STcontroller Software Application
Connectors
Headset: 5-Pin Female XLR Ethernet: RJ45 Jack Remote Control Inputs: 3-Conductor (TRS) 3.5 mm Jack USB-A Receptacle (Used Only for Updating Application Firmware)
Dimensions
8.70 x 4.45 x 1.72" / 22.1 x 11.3 x 4.4 cm
Environmental
Operating Temperature: 32 to 122° F / 0 to 50° C Storage Temperature: -40 to 158° F / -40 to 70° C Humidity: 5 to 95%, Noncondensing Altitude: Not Characterized
Headphone Output
Type: 2-Channel Compatibility: Intended for Connection to Stereo (Dual-Channel) or Monaural (Single-Channel) Headsets with Nominal Impedance of 50 Ohms or More Maximum Output Voltage: 2.9 Vrms, 1 kHz, with 150-Ohm Load Frequency Response: 7 Hz to 9.8 kHz, -3 dB Distortion (THD+N): <0.02% Dynamic Range: >100 dB
Microphone Input
Compatibility: Analog Dynamic or Electret Microphones Type: Unbalanced Electret Microphone Power: 3.3 Volts DC via 2-Kilohm Series Resistance, Selectable On/Off Gain: 24, 30, 36, 42, or 48 dB, Selectable Frequency Response: 42 Hz to 18 kHz, -3 dB, Nominal Distortion (THD+N): <0.03%, 1 kHz, 24 dB Gain Noise Floor: -94 dBFS (A-Weighted)
Type: 100BASE-TX, Fast Ethernet per IEEE 802.3u (10BASE-T and 1000BASE-T (GigE) Not Supported) Power-over-Ethernet (PoE): Per IEEE 802.3af Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s Not Supported)
Package Weight
1.35 lb
Power Source
Power-over-Ethernet (PoE): Class 2 (Low Power, ≤6.49 Watts) per IEEE; 802.3af
USB Flash Drive Used for Updating Application Firmware; Dante Updater Application for Updating Dante Interface Firmware
Weight
0.95 lb / 420 g
Audio Channels
Four Talk, Four Listen
Remote Input
Inputs: 2 Function: Configurable, Can Mimic the Action of Any of the Five Button Functions Type: Active Low, 1 mA Maximum, Inputs Pulled Up to 3.3 Volts DC via 3.4 Kilohm Resistors
